Asus DSBV-DX User Manual page 76

Load Image File
Verify interface information
Backup system BIOS ROM
Check flash memory type(s)
Flash memory block:
Flash programming complete
30% Read in
Identifying flash memory part type
DO NOT shut down or reset the system while updating the BIOS! Doing so can
cause system boot failure!
6. When the utility completes the updating process, a message appears,
informing you that the flash memory has been programmed successfully.
Load Image File
Verify interface information
Backup system BIOS ROM
Check flash memory type(s)
Flash memory block:
Erase block √√√√√√√√√√√√√√√√√√√√√√√√√.
Program block .√√√√√√√√√√√√√√√√√√√√√√√√√√
Verify block .√√√√√√√√√√√√√√√√√√√√√√√√√√
Flash programming complete
Ready to restart the system
4-4
Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
Performing the following function
Save block
Restore block
Zero out block
Erase block
Program block
Verify block
Phoenix Phlash16 Utility Version 1.6.1.9
Copyright (c) Phoenix Technologies Ltd., 2005
Phoenix Phlash16 Status
Performing the following function
Flash memory has been successfully programmed
PRESS ANY KEY TO RESTART THE SYSTEM
If the system does not restart
TURN THE POWER OFF, THEN ON
Save block
Restore block ..........................
Zero out block ..........................
Flash part: SST49LF008A DeviceID:
BIOS.WPH
00:00:00 (18)
BIOS.WPH
5a Mfr.ID:
00:00:00 (1E)
bf
Chapter 4: BIOS setup