Download Print this page

Advertisement

Quick Links

V6
V10
V35
V45
V218-S
V221-S
OWNER MANUAL
'VMAX' SERIES
LOUDSPEAKERS

Advertisement

loading
Need help?

Need help?

Do you have a question about the V6 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for VMAX V6

  • Page 1 OWNER MANUAL ‘VMAX’ SERIES LOUDSPEAKERS V218-S V221-S...
  • Page 3: Table Of Contents

    TABLE OF CONTENTS SAFETY AND OPERATING PRECAUTIONS DESCRIPTION CONNECTIONS SPECIFICATIONS DIMENSIONS...
  • Page 4: Safety And Operating Precautions

    SAFETY PRECAUTIONS IMPORTANT NOTES IMPORTANT Before connecting and using this product, please read this instruction manual carefully and keep it on hand for future reference. This manual is to be considered an integral part of this product and must accompany it when it changes ownership as a reference for correct installation and use as well as for the safety precautions.
  • Page 5 10. Mechanical and electrical factors need to be considered when installing a professional audio system (in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.). 11. Hearing loss Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing loss is different from person to person and depends on the duration of exposure.
  • Page 6: Description

    The cabinet shape will allow V35 model to be used in the standard configuration as well as in stage monitor. At the bottom of V6, V10 and V35 a rugged steel pole mount has been installed. All models have two Neutrik Speakon NL4 connectors (audio input and parallel link output).
  • Page 7: Connections

    The entire sound system shall be designed and installed in compliance with the current local laws and regulations regarding electrical systems. ‘VMAX’ series loudspeakers are designed for indoor use only. If installed outdoor, loudspeakers shall be protected against water. V35 and V45 Models On each rear panel: - A switch to select either ‘FULL RANGE’...
  • Page 8 CONNECTIONS V218-S, V221-S On each rear panel: - A switch to select either ‘PARALLEL’ (one amplifier for two woofers in parallel) or “SINGLE” (one amplifier for one woofer) - 2 sockets (input and output, linked in parallel) for ‘Neutrik Speakon NL4’ (4-pole) plugs.
  • Page 9: Specifications

    SPECIFICATIONS...
  • Page 14 V218-S...
  • Page 15 V221-S...
  • Page 16 www.rcf.it RCF SpA: Via Raffaello, 13 - 42124 Reggio Emilia > Italy tel. +39 0522 274411 - fax +39 0522 274484 - e-mail: rcfservice@rcf.it...

This manual is also suitable for:

V35V218-sV45V10V221-s