Related Manuals for ClearOne ProfCam
Summary of Contents for ClearOne ProfCam
-
Page 1: Table Of Contents
Page Setup and Operation of the ProfCam Connecting the Main Cable Connection Ports for ProfCam Connecting the ProfCam to a TV or VCR Connecting the ProfCam to a PC Computer Connecting the ProfCam to a Macintosh Computer Remote Control Turning the Camera On... -
Page 2: Unpacking And Getting Started Page
The ProfCam has been designed to fold up compactly and easily for storage and transportation. Exercise extreme care whenever unpacking or storing the camera to avoid damage to delicate electronics and other com- ponents. For more information on packaging and storing the ProfCam, refer to section ‘Packing the Camera For Storage and Transportation.’... -
Page 3: Connection Ports For Profcam
Serial Port connector through synch Connecting The ProfCam To A TV Or VCR ’ HIS SECTION DOES NOT COVER REMOTE OPERATION USING THE CAMERA S SERIAL PORT INTERFACE OR MORE INFORMATION ON HOW TO CONFIGURE AND OPERATE THE CAMERA REMOTELY REFER TO “V... -
Page 4: Connecting The Profcam To A Pc Computer
Remote Control The remote control for the ProfCam requires 4 'AAA' batteries (not included). Pull up the battery cover tab as indicated to remove the back cover. Insert 4 'AAA' batteries, making sure the battery +/- terminal symbols line up with the +/- symbols on the inside of the battery compartment. -
Page 5: Turning The Camera On
If the picture is not seen accurately on the LCD screen, try adjusting the controls on the back panel of the ProfCam for optimal viewing. -
Page 6: Light Base
Light Base The ProfCam light base will not reach full luminescence until it has been powered up for at least 90 seconds. It is a carefully designed piece of delicate electronics and there are no user-serviceable parts inside. Do not attempt to change the bulbs in the light base! Doing so may expose you and others in the area to harmful chemicals. -
Page 7: Focus
The video from the external source can then be viewed on both the LCD screen in the base of the ProfCam and through the composite video output of the ProfCam. Note that the S-video jack will still be video output from... -
Page 8: External Synch
External Sync For times when the ProfCam is connected with other cameras to the same monitor, it may be convenient to take advantage of the sync option on the ProfCam. This works best when there are two or more cameras connected to the same video monitor, and you are continually switching between sources (i.e. -
Page 9: Troubleshooting
Troubleshooting Problem Suggestion Green LED does not indicate camera Make sure the Power Adapter is plugged into a wall outlet and the power is turned on. main video cable of the camera. Green LED is on, but no picture appears Check all cable connections to verify they are tight and fully on the screen.
Need help?
Do you have a question about the ProfCam and is the answer not in the manual?
Questions and answers