Base Memory; Extended Memory - Gigabyte GA-8PENXP User Manual

P4 titan series motherboard
Hide thumbs Also See for GA-8PENXP:
Table of Contents

Advertisement

Floppy 3 Mode Support (for J apan Area)
Disabled
Driv e A
Driv e B
Both
Halt on
The category determines whether the computer will stop if an error is detected during pow er up.
NO Errors
All Errors
All, But Key board The s y stem boot w ill not stop for all errors ex cept a key board error.
All, But Disk ette
All, But Disk /Key
Memory
The category is display-only which is determined by POS T (Power O n Self Test) of the BIOS.

Base Memory

The POST of the BIOS w ill determine the amount of base (or conv entional) memory ins talled
in the sy stem.
The v alue of the base memory is ty pically 512 K for sy stems w ith 512K memory installed on
the motherboard, or 640 K for sy stems w ith 640 K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much ex tended memory is present during the POST.
This is the am ount of memory located abov e 1MB in the CPU 's memory address map.
GA-8PENXP Motherboard
8penxp_1001_b.p65
Normal Floppy Driv e. (Default v alue)
Driv e A is 3 mode Floppy Driv e.
Driv e B is 3 mode Floppy Driv e.
Driv e A & B are 3 mode Floppy Driv es.
The s y stem boot w ill not stop for any error that may be detected and y ou
w ill be prompted.
Whenev er the BIOS detects a non-fatal error the sy stem boot w ill be stopped.
(Default v alue)
The s y stem boot w ill not stop for all errors ex cept a disk error.
The sy stem boot w ill not stop for all errors ex cept key board and disk errors.
- 44 -
44
2003/4/11, 下午 03:58

Advertisement

Table of Contents
loading

Table of Contents