Safety 1st MO070 User Manual

User Guide
MO070
Sound Moments™
Audio Monitor
2 Receiver Set
Thank you for purchasing a Safety 1st product. We are not only about safety,
we're also about your satisfaction. If you have any questions or comments,
please call our Consumer Relations department at 1-800-544-1108 or
e-mail us at consumer@safety1st.com
Please read the following instructions and warnings carefully.
Keep these instructions for future reference.
Tool needed: Phillips Head Screwdriver (not included)
WARNING!
Strangulation Hazard - Children have STRANGLED
in cords. Keep cords out of reach of children more
than 3 feet (0.9 m) away.
Features & Components
Parent Unit/
E
Receiver (2)
F
A
K
B
C G I
L
J
D H
Baby Unit/ Q V AC Adapters (3)
Transmitter
M
R
N U
S
O
T
P
Parent Unit (2 Receivers) Baby Unit (Transmitter)
A Speaker M Microphone
B N
Power/1 & 2 Channel Switch Power/1 & 2 Channel Switch
C Low Battery Indicator O Power On Indicator
D P
Power On Indicator Pager Button
E Mute Button Q Night Light Activation
F R
Sound Lights (5 LEDs) Digital Clock Display
G Channel Select Button (A/B) S Channel Select Button (A/B)
H AC Adapter Jack T AC Adapter Jack
I Volume Dial U Battery Compartment
(1 AAA battery)
J External Earphone Jack
K
Belt Clip & Carry Loop
AC Adapter
L Battery Compartment
V AC Adapter (3)
(3 AAA batteries)
Battery Installation & Use
CAUTION!
• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon zinc), or rechargeable
(nickel-cadmium) batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Exhausted batteries are to be removed from the unit.
• Keep batteries out of child's reach. Swallowing a battery could be fatal.
• Used batteries should be disposed of properly.
Do not dispose of batteries in fire - they may explode or leak and cause injury.
• Remove batteries when stored for long periods of non-use.
• DO NOT use audio monitor system in portable mode when batteries are low.
• Ensure that the battery compartment is completely secure after replacing batteries.
BATTERY INSTALLATION:
1. Move belt clip out of way. Unscrew battery
compartment cover as shown.
2. Insert 3 AAA batteries.
3. Replace the battery compartment cover
and tighten screw. To obtain maximum
performance, ALWAYS use alkaline type
batteries in this monitor.
Safety Instructions
IMPORTANT:
• Parent Unit is a Receiver. Baby Unit is a Transmitter.
• Check the reception regularly.
• Certain electronic devices are sensitive to magnetic
fields and may be damaged permanently or temporarily
disabled if exposed to a magnetic field that is too strong.
• To remove AC adapter from the outlet, firmly grasp the
adapter "brick." DO NOT pull on the cord, as this could damage it.
• The LEDs emit IR (infra red) light that is not harmful.
WARNING!
For indoor use only. To reduce the risk of fire or electrical shock,
do not expose this product to water or moisture. NEVER attempt
to disassemble the product. This is dangerous and will void
the warranty.
CAUTION!
This monitor is not intended to be used as a medical monitor and
its use should not replace proper adult supervision. You should
check your child's activity at regular intervals as this monitor will
not alert parents to the silent activities of a child.
CAUTION!
To protect your privacy, always turn the monitor off when not in use.
Always remember that you are using public airwaves. Sound
may be broadcast to other receiving devices outside your home.
Conversations, even from rooms nearby, may be broadcast.
It is essential to check reception regularly.
Please see Use and Care section.
VENTILATION: The Monitor should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation openings, or placed in an
enclosed installation, such as a book case or cabinet that may impede
the flow of air through the ventilation openings.
• Position the Transmitter, Receiver and AC adapters to allow adequate
ventilation and prevent these components from overheating.
HEAT: The Monitor should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances that produce heat.
Also keep these components out of direct sunlight.
POWER SOURCE: The Monitor should be connected to a power supply
only of the type described in these operating instructions.
POWER CORD PROTECTION: The power supply cord should be routed so
that it is not likely to be walked on or pinched by items placed upon or
against it. Pay particular attention to the cord at the plug, convenience
receptacle, and at the point it exits from the Monitor. NOTE: Do not
place adapter under a window where a child might use it to step
on and reach something that might be dangerous.
• Check to make sure outlet plates are not unusually hot to the touch.
If they are, immediately unplug cords from these outlets. Check that
all outlet connections are in good condition so that adapter is not loose
or that no wiring is exposed. Have a qualified, licensed electrician
check the wiring as soon as possible.
OBJECT AND LIQUID ENTRY: Care should be taken so that objects
do not fall onto, and liquids are not spilled into the enclosure through
the openings.
DAMAGE REQUIRING SERVICE: The Monitor should be serviced by
qualified service personnel when:
A. The power supply cord has been damaged; or
B. Objects have fallen or liquid has been spilled into the product; or
C. The Monitor has been exposed to rain; or
D. The Monitor does not appear to operate normally or exhibits
a marked change in its performance; or
E. The Monitor has been dropped or the enclosure damaged.
THE USER SHOULD NOT ATTEMPT TO
SERVICE OR REPAIR THE MONITOR.
ALL SERVICING SHOULD BE REFERRED
TO SAFETY 1ST CUSTOMER SERVICE
DEPARTMENT: (800) 544-1108.
Quick Start Guide
Plug in here
1 Remove protective cling from Baby Unit. 2 Connect AC adapter to the side
Open battery compartment and install included of Baby Unit.
AAA battery to turn on clock.
WARNING!
Strangulation Hazard - Children have STRANGLED
in cords. Keep cords out of reach of children more
than 3 feet (0.9 m) away.
Plug in here
3 Connect AC adapter to the side of 4 Plug Parent Unit and plug Baby Unit
Parent Unit. into wall to operate AC power.
5 Turn Parent Unit on. Slide Power/
Power On &
Channel switch to desired channel
Channel Select
here selection on front and side A/B button.
Channel Power On Indicator will illuminate.
Channel 1
Select
Make sure volume is turned down
A/B
Channel 2 to avoid squealing.
6 Turn Baby Unit on. Slide Power/
Power On &
Channel Select
Channel switch to desired
here Channel
channel selection on front
Select
Channel 1
and side A/B button. Refer to
A/B
Channel Selection section.
Channel 2
Power On Indicator will illuminate.
Using Your Monitor
DO NOT PLACE UNITS IN CRIB OR MOUNT ON CRIB.
KEEP OUT OF REACH OF CHILDREN.
AC ADAPTER
The Parent Unit operates on household electricity with the AC Adapter or
with 3 AAA batteries (not included). The Baby Unit operates on household electricity
with the AC Adapter only. The Parent Unit will automatically convert to AC operation
when used with the AC Adapter. It is not necessary to remove the battery during AC
operation. The Parent Unit will automatically switch back to battery power when plug
is disconnected from the AC Adapter.
The AC Adapter should be used whenever possible on the Parent Unit to save battery
life. This is done by inserting the AC Adapter into the AC Adapter Jack. Then simply
plug the AC Adapter into a nearby standard household outlet (120V AC outlet). The AC
Adapters may become slightly warm to the touch during operation. This is normal.
This AC Adapter is a low voltage power source which allows you to use your house-
hold electricity to run the Baby and Parent Units when it connects to the AC Adapter
Jack in the Parent Unit and in the Baby Unit, and plugs into any standard electrical
outlet in your home.
To remove AC adapter from the outlet, firmly grasp the adapter "brick."
DO NOT pull on the cord, as this could damage it.
CAUTION: This AC Adapter was made with a specific design for the Safety 1st
Monitor. It cannot be used with any other appliance, and never use a different type
of adapter with this Monitor.
Parent Unit (Receiver):
CHANNEL SELECTION
The Monitor can broadcast over four preset factory frequencies or channels. Use setting "1A"
making sure that both units are set to "1A". If you experience static or noise interference, simply
switch both units to channel "1B", "2A" or "2B", whichever channel option provides the best
reception.
POWER INDICATOR
The power indicator is a green LED that indicates that the unit is on and functioning.
VOLUME DIAL
Volume can be easily adjusted to any desired listening level by rotating the Volume
Dial, so you can be sure to hear your baby at all times. The sounds are transmitted through the wide
range speaker. It is essential to check reception regularly. Refer to Use and Care section.
SOUND LIGHTS
As baby's voice gets louder, the sound light LEDs will illuminate from left to right. Low sound is one
LED illuminated and rises incrementally as baby's noise level increases until all 5 LEDs are
illuminated.
LOW BATTERY INDICATOR
Low battery power is indicated by the red LED, which signals when the battery needs to be replaced.
EARPHONE JACK
Earphones (not included) can be plugged into earphone jack on side of Parent Unit.
When earphones are in place, it will mute the speaker.
LINK INDICATOR - OUT OF RANGE
Static noise will be heard if both units are not set
to the same channels or if they are too far apart.
MUTE BUTTON
Press the Mute Button on top of the Parent Unit. The Mute Button will
illuminate top of unit indicating this feature is activated. The Parent Unit Carry Loop
(up)
will be quiet, but the sound lights will continue to illuminate.
Need to press again to unmute.
BELT CLIP
The Belt Clip is convenient for portability. You can clip
the Parent Unit to your belt or waistband after a
Belt Clip
battery has been installed. The Belt Clip also
(down)
easily converts to a carry loop.
Using Your Monitor (continued)
Baby Unit (Transmitter):
PROPER POSITIONING
IMPORTANT: When choosing locations to set up the Baby Unit and Parent Unit, follow
these guidelines:
• For best sound quality, place Baby Unit 6 feet (2 meters) away from the baby.
• Adjust volume dial on Parent Unit to appropriate level to minimize feedback.
• During use of the monitor, sound quality deteriorates as you reach the
limits of the monitor's range. If this happens, you will need to move the
Parent Unit in closer proximity to the Baby Unit.
• Adjust the volume to a comfortable level for your environment.
FREQUENCY RANGE
Channel 1A Frequency: 49.890 Channel 1B Frequency: 49.870
Channel 2A Frequency: 49.830 Channel 2B Frequency: 49.850
Carrier Frequency: 49.830 to 49.890
Field Strength is 80 dB Micro-volts per meter at 3 meters.
CLOCK DISPLAY
Before first use, open battery compartment and install
battery to turn on clock. Set clock using a small tool or
paperclip to press recessed buttons located on front of
Baby Unit. (Left button is MODE, Right button is SET).
MODE SET
To Set the Time:
1. Press the "MODE" switch to select the
Month, Date, Hour and Minute.
2. Press the "SET" switch to adjust the Time, Month and Date you desired.
3. Press the "SET" switch once, the display shows the Month and Date.
Press the "SET" switch twice, it shows the Second.
4. After displaying Month and Date for two seconds,
it returns to Hour and Minute (Normal Time).
NIGHT LIGHT
Activate the night light by pressing on the top of the Baby Unit, which will activate a switch located on
the bottom of Baby Unit. Night light will remain on until you press the top of the Baby Unit again.
PAGER
The Pager Button is helpful to locate a misplaced Parent Unit. With the Baby Unit on, press the pager
button on the front of the Baby Unit. Parent Unit must be on and volume must be elevated to hear
pager beep. Pager will send out a beep to the Parent Unit for 60 seconds. NOTE: The Parent Unit will
only beep if it is powered on.
Troubleshooting
IF YOU ARE STILL HAVING PROBLEMS, PLEASE CALL TOLL FREE FOR HELP! (800) 544-1108.
PROBLEM POSSIBLE CAUSE
Power indicator light Power is not getting to the Unit
not working
Static or interference in the Baby and Parent Units may be
signal transmission on different channels
Appliances with loud fans near Units
may be blocking transmission
Unit may be under fluorescent lights
Local interference from electrical or radio frequency
appliance near your location
Parent Unit is making Units are too close together
loud noises
Volume dial on Parent Unit may be too high
Parent Unit is picking up Neighbors may have a baby monitor or cordless phone
noises from outside
your home
Weak sound coming Battery may be weak
from Parent Unit
Units may be too far away from each other
Mute Button may be activated
Can't hear baby's sounds
Speaker or microphone could be blocked
Battery life is short Battery life in the parent unit will last approximately 24hrs
FCC Statement
Radio and Television Interference
Note: This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules and applicable Industry Canada specifications.
These Limits are designed to provide reasonable protection against harmful interference in a
residential installation. For body worn operation, this product has been tested and meets the
FCC RF exposure guidelines when used with the belt clip supplied or designed with this product.
Use of other accessories may not ensure compliance with the FCC exposure guidelines.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does not cause harmful interference to radio or television
reception, which can be determined by turning this equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To operate this equipment under the Federal Communications Commission rules.
WARNING: Changes or modifications not expressively approved by Dorel Juvenile Group can void
your authority to operate this equipment.
This Category II radiocommunication device complies with Industry Canada Standard RSS-310.
Helpful Hints
Use household electricity whenever possible. When the AC Adapter is used with your
household electricity, you will find that the power is stronger and more consistent than
when you rely solely on the battery. Range and sound quality also depends on the
construction of your house. Steel reinforced wall, for example, reduces the effective
range of the monitor. Conserve the battery so you will have power when you don't
have easy access to AC outlets.
Make sure that both Units are on the same channel.
Even though you may hear you baby's sounds, proper use of this system requires that
both Units must be on the same channel. If the Units are on different channels, the
signals from the Baby Unit may still be strong enough to be picked up by the Parent
Unit, but there will be a lot of static.
When not using the Unit, remove AC Adapter
and be sure the power button is "OFF".
When you are not using the AC Adapter, remove it from the Unit and store it in a safe,
dry place until you need it again. If the AC Adapter is plugged into the Parent Unit but
not being used in an electrical outlet, the AC Adapter will prevent battery operation
of the Unit.
When using the AC Adapter with household electricity,
make sure the outlet is "ON".
Some electrical outlets are powered through a switch in the room. If the Baby Unit is
plugged in and turned "ON", the power indicator light should be lit. If it is not, try
turning the light switch in the room "ON".
Use and Care
IMPORTANT:
The first time you use your monitoring system, two adults should test it in the
following way:
• Place Parent Unit at least 20 ft. (6m) away from Baby Unit.
• Have an adult speak into Baby Unit at various levels (soft to loud)
while another adult checks Parent Unit for the proper sound reception.
Try Parent Unit in every location that it will be used.
Care and Cleaning:
Use a soft, dry cloth to keep your monitor free from dust.
DO NOT immerse product in water.
SOLUTION
Make sure wall outlet is working; may possibly need to be turned on by a switch
Make sure AC adapter is plugged into wall and the Unit
Make sure both Units are on the same channel (4 channel options: 1A, 1B, 2A or 2B)
Turn off the appliances that may be causing interference
Reduce the distance between the two Units or turn off lights
Switch channel setting on both Parent and Baby Units
Parent Unit needs to be at least 10 feet / 3 meters away from the Baby Unit
Turn down volume on the Parent Unit
Change both Units to the alternative channel (4 channel options: 1A, 1B, 2A or 2B)
Check battery; replace if necessary
Move the Units closer to each other
Press the Mute Button on top of the Parent Unit to unmute
Keep speaker/microphone clear from obstructions
Use unit cautiously during battery operation to conserve your battery life
One (1) Year Limited Warranty
™
Dorel Juvenile Group, Inc. warrants to the original purchaser that this Sound Moments Audio
Monitor 2 Receiver Set, is free from material and workmanship defects when used under normal
conditions for a period of one (1) year from the date of purchase. Should the product contain
defects in material or workmanship Dorel Juvenile Group, Inc., will repair or replace the product,
at our option, free of charge. Purchaser will be responsible for all costs associated with
packaging and shipping the product to Dorel Juvenile Group Consumer Relations Department at
the address noted below and all other freight or insurance costs associated with the return.
Dorel Juvenile group will bear the cost of shipping the repaired or replaced product to the
purchaser. Product should be returned in its original package accompanied by a proof of
purchase, either a sales receipt or other proof that the product is within the warranty period.
This warranty is void if the owner repairs or modifies the product or the product has been
damaged as a result of misuse.
This warranty excludes any liability other than that express stated previously, including but not
limited to, and incidental or inconsequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS
THAT MAY VARY FROM STATE TO STATE.
Thank you again for purchasing a Safety 1st product. We are not only about safety, we're also
about your satisfaction. If you have any questions or comments, please call our Consumer
Relations department at 1-800-544-1108 or e-mail us at consumer@safety1st.com.
©2012 Cosco Management, Inc. All Rights Reserved. Todos derechos reservados.
www.djgusa.com (800) 544-1108 www.safety1st.com Made in CHINA.
Hecho en CHINA. Styles and colors may vary. Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus,
IN 47201-7494 Dorel Distribution
safety1st.com
Canada, 873 Hodge, St. Laurent, 5/2/12
QC H4N 2B1 Register for our eNewsletter and 4358-5852
watch our experts on Safety 1 st TV