Connecting The Cover-Stand (Wam750, Wam751 Only) - Samsung WAM750 User Manual

Connecting the Cover-Stand (WAM750, WAM751 only)

A
Before attaching the Cover-Stand, remove the
1
rear cover.
Insert the power cable through the Cover-Stand
hole into the M7 power port.
The inside of the Cover-Stand has two sides.
2
One side (A) has four tabs - two large tabs and
two small tabs. The other side (B) has two large
tabs only. Insert the two large tabs on side A into
the two slots in the area marked A in the diagram.
Turn the M7 so the side marked B in the diagram
3
is facing you. With the thumbs of both hands,
press side B of the Cover-Stand so that the tabs
on side B snap into the slots in the area marked B
in the diagram. You may need to press side B of
the Cover-Stand with some force.
The M7 can now be installed vertically.
4
Caution
9 Do not place the M7 on an unstable surface.
noteS
9 Turn the speaker upright using the stand to set the
speaker to MONO mode.
9 Turning the product upright or laying it down in the
middle of playing music may temporarily cause unstable
sound.
A
4444 10
B