Memorex MX5310 User Manual page 8

TO INTERRUPT PLAYBACK:
1. Press the PLAY / PAUSE
" " will appear.
2. Press the PLAY / PAUSE
TO STOP PLAYBACK:
Press the STOP button.
TO REMOVE THE CDs:
Whilst in the stop mode, press the OPEN / CLOSE button.
The disc tray will open. Remove the two discs. Then press the DISC SKIP button to rotate the disc
tray and remove the remaining disc.
SKIP SEARCH
The skip search function allows you to "SKIP" tracks in the forward or reverse direction in order to go
quickly to the desired selection.
CAUTION:
Only load to replace CDs on the two forward
disc holders. Do not try to force a CD into the
back disc holder as this will cause the CD to
become jammed resulting in malfunction and / or
damage to the system.
Make sure that CDs are properly placed in the
disc holders.
To skip tracks in the forward direction:
Press the button
To skip tracks in the reverse direction:
Press the button
MANUAL SEARCH
Use the manual search function to search for any point on the compact disc. Manual search operates from
the playback or pause mode only.
To search in the forward direction:
Press and hold the
To search in the reverse direction:
Press and hold the
Note:
During manual search from the playback mode the playback volume will be reduced.
During manual search from the pause mode the volume will be cut completely and the search speed
will be increased by approximately 2 times the normal speed.
To restart playback, press the
DISC CONTROL BUTTON
Direct disc selection.
Press the CD control button (DISC 1 to DISC 3) corresponding to the no. of the required CD
Example: To designate DISC 2.
The tracks on the designated CD are played in sequence.
Memorex.p65
button.
button to resume playback from the same point.
button until the desired point is found.
button until the desired point is found.
/ button.
E-8
8 11/8/01, 11:11 AM