1. Manuals
  2. Brands
  3. MicroTalk Manuals
  4. Two-Way Radio
  5. MT 800
  6. Operation manual

MicroTalk MT 800 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ENGLISH
1
10
9
8
7
Product Features
• Two-Way Radio
with up to a 5 km (3 mile) range
• 8 Channels*
• 38 CTCSS Privacy Codes
• 83 DCS Privacy Codes
• Backlit LCD Display
• Battery Saver Circuitry
• Maximum Range Extender
• VOX Mode for Hands-Free Transmissions
• Baby Monitor Function
• Call Alert (10 Selectable Tones)
• Scan (Channel, Privacy Code)
• Dual Watch Programmable 2-Location Scan
• Key Lock
• Auto Squelch
• Selectable On/Off "Roger Beep"
Confirmation Tone
• Selectable On/Off Keystroke Tone
• Combination Speaker/Microphone/Charging Jack
• Belt Clip
*You are not allowed to use channels 1 and 2 in France.
This situation can change; please contact the French radio licensing
authority for more information.
1. Dual Watch Icon
2. Scan Icon
3. Roger Beep Icon
4. DCS Icon
5. Keystroke Tone Icon
6. Lock Icon
7. VOX Icon
Two-Way Radio Model MT 800
2
CHRG
3
1
14
13
8. CTCSS Icon
9. Baby Monitor Icon
10. Battery Low Icon
11. Privacy Code Numbers
12. Power Saver Icon
13. Main Channel Number
14. Receive/Transmit Icon
1. Antenna
2. External Speaker/
Microphone/Charge Jack
3. Mode/Power Button
4. Lock Button
5. Channel Control Buttons
6. Speaker/Microphone
7. Light/Max Range Button
8. Volume Control Buttons
9. Talk Button
10. Call Button
11. Belt Clip
12. Battery Compartment
13. Lock Tab
4
11
5
12
6
13
4
2
3
12
5
6
7
8
9
10
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MT 800 and is the answer not in the manual?

Questions and answers

Related Manuals for MicroTalk MT 800

Summary of Contents for MicroTalk MT 800

  • Page 1 Two-Way Radio Model MT 800 ENGLISH 1. Antenna 2. External Speaker/ Microphone/Charge Jack 3. Mode/Power Button 4. Lock Button 5. Channel Control Buttons 6. Speaker/Microphone 7. Light/Max Range Button CHRG 8. Volume Control Buttons 9. Talk Button 10. Call Button 11.

  • Page 2: Product Information

    It is not recommended to recharge batteries more than 24 hours. Estimated operation time on a full charge is 12 hours. Use only the supplied rechargeable batteries and wall charger for recharging your microTALK ® radio. Non-rechargeable alkaline batteries can also be used.

  • Page 3: Auto Squelch

    Light/Max Range Button LIGHT/MAX RANGE button to Release the TALK button to illuminate the display for 10 receive incoming transmissions. seconds. Your microTALK ® is always in Auto Squelch/ LISTENING MODE except when Maximum Range Extender the TALK, CALL or MODE buttons are pressed.
  • Page 4 MODE FUNCTIONS English External Speaker/Microphone/ To Select a CTCSS Privacy Charge Jack Code: Mode Button 1. After selecting a channel, Your microTALK ® radio can be External Speaker/ press and release the Microphone/ fitted with an external Charge Jack MODE button until the...

  • Page 5: Channel Scan

    LISTENING MODE. Voice Activated Transmit (VOX) channel number flash on the display. 2. Press the CHANNEL UP or In VOX Mode, your microTALK radio can be used ® Select Scan Channels CHANNEL DOWN button to “hands-free,” automatically transmitting when you begin scanning channels.
  • Page 6 The Following: CTCSS Privacy Code Scan transmitted or received. a. Press and hold the TALK button to Your microTALK radio can automatically scan communicate on either the channel or ® the CTCSS privacy codes (01 to 38) within one channel/privacy code that was displayed (1) channel.

  • Page 7: Dual Watch

    MODE FUNCTIONS OPERATION English Dual Watch During Scanning (While Receiving an Incoming Transmission), You Can Choose from the Following: Dual Watch allows you to simultaneously monitor any two (2) Dual Watch Locations: a. Press and hold the TALK button to Dual Watch Location 1 –...

  • Page 8: Baby Monitor

    MODE FUNCTIONS OPERATION English To Turn Dual Watch On: During Dual Watch (while not receiving a transmission), You Can Choose From The Following: NOTE: Dual Watch Location 2 must be programmed to turn Dual Watch on. a. Press and hold the TALK button to 1.

  • Page 9: "Roger Beep" Confirmation Tone

    To Terminate Baby Monitor Mode: On or Off. To Turn “Roger Beep” On or Off: Choose one of the following: When you turn On your microTALK radio for the ® a. Press the TALK button and return to first time, “Roger Beep” will be On.
  • Page 10 To Turn Keystroke Tones On or Off: setting and return to LISTENING MODE. b. Press the LOCK button to enter the new When you turn On your microTALK ® radio for the setting and return to LISTENING MODE.

Table of Contents