Table of Contents
Advertisement
5
When the disc is through playing, it will
stop. Press the Stop (I)/Power Off button
to stop the disc before it is finished. Press
the Stop (I)/Power Off button again to turn
the unit off.
CD PLAYBACK NOTES:
• See page 20 for more information on MP3's.
• When recording ("burning") CDs, make sure the session is "finalized", or simply record
("burn") only one session. You can find more information in your recorder's manual.
• This unit is capable of playing standard CDs or 3" singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, "no disc" will appear
in the display.
• If a disc is not recorded properly, a disc error will occur.
• Playback will stop when you open the CD compartment, but it is not recommended to
open the compartment before the Stop (I)/Power Off button is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin playback,
depending on the number of tracks burned on the CD.
• The EQ function is only available for CD playback.
OPERATION (CONTINUED)
13
Advertisement
Table of Contents
