4.9 Audio Trouble Shooting
4.9.1 Receiver
•
Signals to the receiver
–
Receiver signals are generated at AB3000
–
Receiver path :
♣ Note : It is recommended that engineer should check the soldering of R, L, C
along the corresponding path before every step.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
•
BEARP, BEARN
•
1. AB3000 (BEARP, BEARN)
•
2. CN502 on main board
•
3. Main FPCB
•
4. Upper FPCB
•
5. Receiver
- 99 -
4. Trouble Shooting
LGE Internal Use Only