Table of Contents
Advertisement
Operation Instruction Continued
Select an input: Use the SOURCE Button on the control panel to scroll through the inputs, or
select the input on the remote control.
Bluetooth Pairing Process:
1) Make sure your wireless device is ready for pairing. If you are unsure how to do this, check
the manual that came with your device.
2) To start the pairing process:
Control Panel: Press the POWER button until the blue light starts to flash.
or
Remote: Press the BLUETOOTH button until blue light starts to flash.
Pairing: Select BDS4012-50 / BDS4012-60 on your device. The blue light will stop flashing
when it is paired.
NOTE: Only 1 device can play through the sound shelf at a time. Please disconnect the
other device if you cannot connect.
DISPLAY MESSAGES
BLUE - Bluetooth mode
L 1 - This is for the device connected to the 3.5mm line input on the back of the speaker.
L 2 - This is for the device connected to the 3.5mm line input on the control panel.
AU - This is for the device connected to the RCA Stereo line input on the back of the
speaker.
OP - This is for the device connected to the Optical input on the back of the speaker.
A316
36
bello-digital.com
Advertisement
Table of Contents
