Table of Contents
Advertisement
MMP3682
MP3/WMA
Symptom
Possible Reason
No fies are
Not supported file type.
showing on the
player after
transfer
Player doesn't
Poor connection to PC.
display "Mass
Storage
Device"
Corrupted files or firmware
No power after
loading files
When I turn my
Hold switch is on.
player on,
"Hold" and
" "
appears.
MMP3682
MMP3642
MP3/WMA
MP3/WMA
Firmware Upgrade Procedure
●
For WinME, Win2000 or WinXP only
Your new player shipped with the most current version of the firmware available.
No update is required at this time.
1. Install the "Memorex Solid State Digital Audio Player" program in your computer
1.1 Insert the Installation CD
1.2 An InstallShield Wizard will pop up automatically
1.3 Click on Next to proceed the installation
1.4 Once the installation is done, click on Finish
2. Firmware Download
2.1 Download the latest firmware from our website www.memorexeletronics.com.
Unzip the firmware file into the directory C:\Program Files\Memorex\Digital
Audio Player
2.2 Click on Start and select Program. From program, select the Memorex Solid
State Digital Audio Player, then click on Update.
2.3 An Update dialogue box will pop up. Click on Start and the application
program will begin to download the firmware.
Remarks: Some memory space in Flash Memory is reserved for Firmware Upgrade
Features. Therefore, usable memory space will be less than 128MB.
Actions
Make sure the files are MP3 or WMA.
Check both connections- you may
need to conect the player to a
USB port on the back of your PC.
Perform the Firmware update
procedure- see page 23.
See page 5 for location of
hold switch.
21
23
MMP3682
MP3/WMA
WARNING!
Do not format this player unless it stops working and you are instructed to do
so by technical support personnel.
Formatting the Player
●
1. Click on Start and select Program. From program, select the Memorex Solid
State Digital Audio Player, then click on Format.
2. A Format dialogue box will pop up, click on Start and the application program
will format the Player.
Do not update the firmware unless you are experiencing problems with your
digital audio device. Incorrect or faulty firmware installation will cause the
player to stop functioning.
MMP3682
MP3/WMA
Technical Specifications
●
Category
Item
Frequency Range
Audio
Headphone Output
S/N Ratio
File Type
File Support
Bit Rate
Tag Info
Dimension
Battery
LCD
Language
USB
External Memory
Built-in Memory
Max. Playtime
Supported OS
Firmware Upgradeable
Operating Temperature
22
Specification
20Hz - 20KHz
20mW, 16ohm (Max.Vol)
85dB (MP3)
MPEG 1/2/2.5 Layer 3, WMA, WAV (ADPCM), (WMA with DRM)
8Kbps - 320 Kbps
ID3 Tag
O 63mmX62mmX20mm
1 AA size Alkaline Battery
Full Graphics
English
USB2.0
SD or MMC
128MB
Approx. 18 hours (128Kbps, MP3)
Win ME, Win 2000, Win XP
Yes (except Win 98)
o
o
-5
C to 40
C
24
Advertisement
Table of Contents
