North American Tool 6800 Operating Instructions Manual

Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this
product. Observe all safety information to protect yourself and others. Failure to observe the instructions may
result in property damage and/or personal injury. Please keep instructions for future reference.
Important Operating Instructions
8000* XL GAS GENERATOR
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or
grind materials such as wood,
paint, metal, concrete, cement,
or other masonry. This dust
often contains chemicals
known to cause cancer, birth
defects, or other reproductive
harm. Wear protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead,
known to the State of California
to cause cancer and birth
defects or other reproductive
harm. Wash hands after
handling.
CAUTION:
FOR YOUR OWN SAFETY
READ INSTRUCTION MANUAL
COMPLETELY AND
CAREFULLY BEFORE
OPERATING THIS GASOLINE
ENGINE Failure to follow all
instructions as listed below
may result in electrical shock,
fire, and/or serious personal
injury.
For warranty purchase, please keep your dated proof of purchase. File or attach to the manual for safekeeping.
For customer service, call 1-800-348-5004 or email
SPECIFICATIONS:
Engine: 4-stroke; Single phase;
Electronic ignition
Start Type: Recoil
Rated Power: 5500W
Fuel Capacity: 5.6gallons
Run Time:9 hours
SAFETY WARNINGS
1) Do not operate this generator
indoors or in enclosed spaces.
Emissions created by this
generator are harmful.
2) Do not operate the generator in
wet conditions. This will increase
the risk of electrical shock.
3) Do not directly connect the
generator to a household power
supply.
4) Do not smoke while refueling
the generator. Do not overflow the
fuel when refueling the generator.
Stop the generator before
refueling. Gasoline is
feedback@natitools.co
1
flammable and the sparks may
cause it to ignite. Keep the
generator at least 3 feet away
from flammable materials.
5) Electrical equipment,
including any lines and plug
connections, should be
insulated.
6) The circuit breakers should
be matched with the generator
equipment. If the circuit
breakers need replacement,
they must be replaced with a
breaker that has identical
ratings and performance
characteristics.
7) Do not operate the generator
before grounding it. An
ungrounded generator could
cause electrical shock to occur.
8) The temperature of the
environment will affect the
overcurrent protector. Please
change the protector so it will fit
with the local environment
temperature.
m
Model: 6800
8807517 7/11