B&B EIR208 Series Quick Start Manual

EIR208 Series Quick Start
Guide

Package Contents

• EIR208 Series Industrial, Unmanaged, Ethernet Switch
• Quick Start Guide (One per shipment)
• Power Terminal Block (installed)
• Fiber Optic Dust Covers (installed on fiber optic models)
If any item is missing or damaged, contact B&B Electronics
for a replacement

Front Panel

EIR208 (3 Fiber, 4 RJ45)
Power Terminal Block
1
PWR LED
2
Fiber Optic SPD LED
3
Fiber Optic LINK LED
3
RJ45 LINK LED
4
RJ45 SPD LED
4
RJ45 Ports
5
Fiber Ports
6

DIN Rail Mounting

EIR208 (8 RJ45)
2 Position, Removable
ON When Power Applied
Normally OFF (100BaseFx)
ON when Fiber Port Linked
ON when RJ45 Port Linked
Flashes When Data Transmitted
ON if 100 mbps
Number depends on model
Number and type depends on Model
p/n 8451R001 EIR208 3409qsg-1/2
© 2009 by B&B Electronics. All rights reserved.
1. Slide and hold the DIN clip toward the bottom of the
switch. Angle the top portion of the DIN mount over the
top of DIN Rail.
2. Move the switch so that it is parallel with the DIN Rail.
3. Let go of the DIN Clip. The spring should return it to its
original position.
Attach Power Leads
External Supply Required
Power input: 10 to 48 VDC, 5.8W maximum, Class 2
Surrounding Air Ambient Temperature: 0 to 55° C
1. Loosen the screw to open the terminal block lead clamp.
2. Insert the power lead. TB will accept 16-28 AWG wire.
3. Tighten the screw to close the terminal block lead clamp.
Ensure the clamp holds the lead securely. However, do not
over tighten.
NOTE: For Replacement Terminal Block Order Part #7444.
International Headquarters: 815-433-5100 www.bb-elec.com
European Headquarters: + 353 91 792444 www.bb-europe.com