Advertisement
USING YOUR MICROPHONE (TRANSMITTING)
To use your microphone, please see the following:
1
Insert the large end of the cord into the
Microphone jack on the unit you are
connecting this wireless microphone
to, and the small end into the Line OUT
jack on the receiver.
3
Slide the Receiver's POWER switch
to the ON position; the red POWER
indicator on the receiver will light. If
the microphone is on, the green
Microphone ON indicator on the
receiver will also light. Raise the
antenna for best reception and speak
or sing into the microphone as
desired.
NOTES:
•
When done using the receiver, slide the POWER switch to the OFF
position; the red POWER indicator will go out.
•
If your microphone is not to be used for a long period of time, remove the
batteries in the microphone and the receiver.
•
If the microphone is out of range (microphone too far away from the
receiver) the green Microphone ON indicator on the receiver will turn off
and the microphone will be muted.
OPERATION
2
Slide the Microphone ON/STANDBY/
OFF switch to the ON position; the
POWER indicator on the microphone
will light.
4
Slide the Microphone ON/STANDBY/
OFF switch to the STNBY (Standby)
position to put the microphone in
Standby mode (it will be on, but will not
transmit).
ON/STANDBY/OFF switch to the
OFF position to turn the microphone
off; the POWER indicator on the mic
and the green MIC indicator on the
receiver will go out.
4
Microphone
Slide
the
Advertisement
