Memorex MLT4221P User Manual page 20

Chapter 2 Installing the LCD TV

Press the
INPUT
TV and press the OK button.
Input Source
 TV(CABLE/AIR)
VIDEO1 (SIDE)
VIDEO2 (REAR)
VIDEO3 (S-VIDEO)
VIDEO4 (YPbPr1)
VIDEO5 (YPbPr2)
VIDEO6 (HDMI1)
VIDEO7 (HDMI2)
COMPUTER(VGA)

Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Channel Scan
Tuner Mode
Channel Skip
Favorite List
Time Zone
TV

Press the ▼ button to select Channel Scan, and press the
The Channel Scan automatically creates a list of receivable channels. Press the MENU
button at any time to interrupt the memorization process.(the list cannot be created if
interrupted)
The Channel Scanning will create a list of receivable channels for the current
input (antenna or cable). You will be required to run Channel Scanning for each
RF input to create a list of available channels from both inputs.

Press the OK button to display the received channel list, then press ▲▼ to select a
channel. Or, use the ▪ (INPUT button) with 0- buttons to select digital channel( for
example 9.1)
Channel List
-2 RF-2
- KQED-HD
-2 KOED-SD
 CCT
2
3

The digital main channel might include many subchannels (for example -, -
2..) that are showing program at the same time.
button on the remote to display the Input List. Use the ▲▼ buttons to select
Cable
Eastern Time
Select Exit
OK

button.