Gigabyte GA-7DPXDW-P User Manual page 26

GA-7DPXDW-P Motherboard
E) J1: F_PANEL (2x11 pins jumper)
2
1
H (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RE (Reset Switch)
P(Power LED)
PW (Soft Power Connector)
GN(Green Switch)
G(Green LED)
Ø Please connect the power LED, PC speaker, reset switch and power switch etc of your chassis
front panel to the front panel jumper according to the pin assignment above.
1
1
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
Open: Normal Operation
Close: Entering Green Mode
Pin1: LED anode (+)
Pin2: LED cathode(-)
26
14
13