Advertisement
Quick Links
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking unit, inspect carefully for any
damage that may have occurred during transit.
Check for loose, missing, or damaged parts. If
any damage is observed, a shipping damage
claim must be filed with carrier. Do not use the
OEMTOOLS Impact Wrench if broken, bent,
cracked or damaged parts (including labels)
are noted. Any Impact Wrench that appears
damaged in any way, operates abnormally or is
missing parts should be removed from service
immediately. If you suspect that the Impact
Wrench was subjected to shock load (a load
that was dropped suddenly, unexpectedly, etc.)
immediately discontinue use until it has been
checked by a factory authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Impact Wrench under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain
that anyone that uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING
: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
Notes
: Provide clarity and helpful information.
WARNING
Pursuant to California Proposition 65, this product contains chemicals known to the state of
California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
12/14
2014 ©OEMTOOLS
MIGHTY COMPACT
½" IMPACT WRENCH
24403
Advertisement
Summary of Contents for OEM 24403
- Page 1 Operating Instructions and Parts Manual 24403 Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
- Page 2 Operating Instructions and Parts Manual 24403 MIGHTY COMPACT ½” IMPACT WRENCH Thank you very much for choosing an OEMTOOLS 8. Check for damage. Check your tool regularly. If Product! part of the tool is damaged it should be carefully inspected to make sure that it can perform its For future reference, please complete the owner’s...
-
Page 3: Important Safety Instructions
PURPOSE operator or of failure to observe the basic safety rules The 24403 Mighty Compact ½” Impact Drive Wrench is a set forth in the instruction manual. combination of composite materials, alloyed metals and... -
Page 4: Maintenance
Operating Instructions and Parts Manual 24403 MIGHTY COMPACT ½” IMPACT WRENCH PREPARING WRENCH FOR USE MAINTENANCE Air Supply WARNING Ensure wrench air valve (or trigger) is in the “off” position Disconnect wrench from air supply before changing before connecting to the air supply. According to accessories, servicing or performing maintenance. - Page 5 Item # Part Name Quantity 24403-19 Hammer Pin 24403-1 Housing 24403-2 Trigger 24403-20 Ball Bearing 24403-3 Valve Seat 24403-21 Front End Plate 24403-22 Cylinder 24403-4 Throttle Valve 24403-23 Rotor 24403-5 Valve Spring 24403-24 Rotor Blade 24403-6 Exhaust Deflector 24403-25 Locking Pin...
- Page 6 OEMTOOLS does not provide warranty for products labeled other than OEM or OEMTOOLS . OEMTOOLS will not provide any warranty for products subjected to abnormal use. Abnormal use includes, but is not limited to, abuse, accident, alteration, neglect, and unauthorized or unreasonable use or repairs.