Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11: Sierra Video Products. Congratulations on purchasing your Kramer TR-93 200W Audio Transformer / TR-94 2x200W Audio Transformer, which is ideal for the following typical applications: ...
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer TR-93 / TR-94 away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building.
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
Overview The TR-93 200W Audio Transformer is a 200W transformer for speaker signals. The unit takes one 4Ω/8Ω channel from the speaker output of a power amplifier, transforms it to 70V/100V and distributes it to an array of loudspeakers. The TR-94 2x200W Audio Transformer is a 2x200W transformer for speaker signals.
OUTPUT (70V or 100V and COM) Connect the 70V or 100V (+) and COM (-) terminals Terminal Block Connectors to a 70V/100V speaker Figure 2 defines the TR-94 2x200W Audio Transformer. TR-93 / TR-94 – Defining the TR-93 and TR-94...
Figure 2: TR-94 2x200W Audio Transformer Feature Function INPUT (4Ω or 8Ω and COM) Connect to the + (4Ω/8Ω) and - (COM) terminals of an audio amplifier CHANNEL 1 Terminal Block Connectors OUTPUT (70V or 100V and COM) Connect the 70V or 100V (+) and COM (-) terminals to a 70V/100V speaker INPUT (4Ω...
Installing in a Rack (for the TR-94 only) This section provides instructions for rack mounting the unit. TR-93 / TR-94 - Installing in a Rack (for the TR-94 only)
Section 6.2) Always switch off the power to each device before connecting it to your TR-93 / TR-94. After connecting your TR-93 / TR-94, connect its power and then switch on the power to each device. Connecting the TR-93 To connect the TR-93, as illustrated in the example in...
Note that you have to select the same power settings (70V or 100V), as required, for both channels. 3. Connect the audio amplifier (the Kramer 914 in this example) by connecting: It to an audio source (not shown in Figure ...
19" x 7" x 1U (W, D, H) rack (8.4" x 6.4" x 1.7") W, D, H mountable WEIGHT: 2.90kg (6.4lbs.) 6.25kg (13.8lbs.) RK-1 19” rack mount adapter OPTIONS: Specifications are subject to change without notice at http://www.kramerelectronics.com TR-93 / TR-94 - Technical Specifications...
Page 17
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the TR-93 and is the answer not in the manual?
Questions and answers