Subscribe to Our Youtube Channel
Summary of Contents for Hartmann Neuron
- Page 2 “www.smartftp.com” and this manual was published. “java.sun.com” belong to their respective holders. Neither Hartmann GmbH nor its suppliers shall be liable for incidental, consequential, indirect, special, or punitive demages of any kind, loss of (sound-)data, or other financial loss (including...
-
Page 3: System Requirements
Systemrequirements: • MAC OS9: Power Mac G3 or G4 Processor, 400 MHz or faster, 128 MB RAM, CD ROM drive, at least 30 MB free space on hard drive, 256 color monitor (or better), 800x600 or larger, “Macintosh Runtime for Java (MRJ 2.2.5). For data transfer FTP client software “Transmit”... - Page 4 Individual Sounds and SetUps as well as complete data In order to take full advantage of the different ways Sets are transferred via USB using third party FTP client to facilitate data transfer to and from <Neuron>, we software. strongly recommend that you read this document carefully, along with the separate <Neuron>...
- Page 5 Send the update f ile (neu- ron_xxx.mid – xxx contains the ver- sion number) via SysEx data transfer from your MIDI recording/playback application directly to your <Neuron> synthesizer. More details on MIDI and SysEx settings can be found in the <Neuron> user manual.
- Page 6 In order to transfer Models, Sounds and SetUps to and connecting through a network hub, make sure to use from your <Neuron>, you need to connect your Mac/PC a standard network cable. Please note the diagram to <Neuron> via a USB-Ethernet adapter (we illustrating the USB connection options.
- Page 7 In order to “activate” the transferred data, please run “Load Software”, "Load Models", "Load Sounds" or "Load SetUps" on your <Neuron>. They can be found in the “Load/Dump” menu. This procedure may take a couple of minutes, depending on the amount of data.
- Page 8 Models are exported to FromNeuron/Sounds and To subsequently copy the required data to your com- FromNeuron/Models, respectively. puter, use FTP client software to log into <Neuron> as described above. „Dump FTP All Models“ exports all Models in the <Neu- ron>...
Need help?
Do you have a question about the Neuron and is the answer not in the manual?
Questions and answers