ATD Tools ATD-10802 Instruction Manual

4.8V CORDLESS SCREWDRIVER W/PISTOL
Introduction
For correct usage, read these instructions carefully and keep in a safe place for future
reference.

GENERAL SAFETY RULES

Failure to follow all instruction listed blew, may result in electric shock, fire and/or serious
personal injury.

Work Area

1. To prevent accidents, keep your work area clean and well lit.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks, which could ignite dust or fumes.
3. Keep bystanders, children and visitors away while operating a power tool. Distractions can
cause you to lose control.

Electrical Safety

1. Never carry the tool by the power cord and keep the cable away from heat, oil, sharp edges,
or moving parts. If the power cord is damaged, replace it immediately to prevent the risk of
fire.
2. The battery must only be recharged with the charger included. A charger that may be
suitable for one type of battery may create a risk of fire when used with another battery.

Personal Safety

1. Stay alert and use extreme caution when operating a power tool. Do not use any tool while
tired or under the influence of drugs, alcohol, or medication. A moment of carelessness while
operating any power tool can result in serious personal injury.
2. To reduce the risk of injury, never wear loose fitting clothing or jewelry when operating the
tool and keep your hands from the moving parts. If you have long hair keep it tied back.
3. To avoid accidental start up make sure the safety switch is in the locked position before
inserting the battery.
ATD-10802
GRIP & 100 BITS