DYNA-FOG CDC UV MOSQUITO LIGHT TRAP MODEL 2505 Specifications Power Supply……………………………………………………………… 6 volts DC Current Draw………………………………………………………….. 300 ma (nom.) Motor Speed………………………………………………………………. 2500 RPM Fan …………………………………………………………… 3 In. (7.6 cm)/4 blades Light Bulb………………………………………………....# 44, # 47 0r # 503 Weight of Light Trap………………………………………………… 1.55 lbs. (.70 kg) Weight of Battery Holder and extension wire assembly……………...
Field trials have shown that the best collection times are during the dark phases of the moon and on overcast nights. The Light trap model 2505 requires 300 ma (nominal) to operate at 6.0-6.3 volts DC. The trap is designed to be powered by a nominal voltage of 6 volts DC.
150 ma # 44 6.3 Volts 250 ma MSCP = Mean Spherical Candlepower. Higher MSCP means brighter light. The Light Trap model 2505 is supplied with the Light Bulb # 44. Troubleshooting Tips Problem Possible Cause Corrective Action Unit will not operate...
Optional Sealed Lead Acid Battery Available – Allows extended operation where traps cannot be maintained on a daily basis. Contact Curtis Dyna-Fog for more information. Dyna-Fog offers an optional power source that can be used, a rechargeable 6 volt 12 Amp-Hour battery, which allows longer operation time of the Light trap between charging periods.
AIRFLOW unattended and uncollected light trap specimens without specimen escape. (FAN IS NOT OPERATING) CURTIS DYNA-FOG self closing gate can be used on PARTIAL OPEN GATES any light trap, including the competitors. After installing self-closing...
Page 12
Diversity of pumping systems, Gear, Piston and Diaphragm. Pressurized system available for overseas market. Optional Radar Syncroflow. 40 cc Two cycle portable machines also available. ® 17335 US Highway 31 North CURTIS DYNA-FOG Ltd. Westfield, IN 46074 U.S.A. www.dynafog.com www.dynafog.com Phone: (317) 896-2561...
Need help?
Do you have a question about the 2505 and is the answer not in the manual?
Questions and answers