Nemesis SEA111 Assembly Manual
  1. Manuals
  2. Brands
  3. Nemesis Manuals
  4. Toy
  5. SEA111
  6. Assembly manual

Nemesis SEA111 Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NEMESIS
"Graphics and specifications may change without notice".
Specifications
Wing span------------------------------------- 55.9in ------------------------------- 142cm.
Wing area------------------------------------- 514.6 sq.in ------------------ 33.2 sq.dm.
Approximate flying weight--------------- 5.3-6.2 lbs -----------------------2.4-2.8kg.
Length----------------------------------------- 46.1in ---------------------------------117cm.
Recommended engine size------------ .40 - .46 cu.in ---------------------2-stroke.
ELECTRIC CONVERSION : OPTIONAL.
Radio System required 4 channels with 5 servos.
Flying skill level Intermediate/advanced.
Kit features.
•
Ready-made—minimal assembly & finishing required.
•
Ready-covered covering.
•
Photo-illustrated step-by-step Assembly Manual.
Made in Vietnam.
ASSEMBLY MANUAL
.52 - .72 cu.in --------------------- 4-stroke.
MS: SEA 111

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SEA111 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nemesis SEA111

  • Page 1 NEMESIS MS: SEA 111 ASSEMBLY MANUAL “Graphics and specifications may change without notice”. Specifications Wing span------------------------------------- 55.9in ------------------------------- 142cm. Wing area------------------------------------- 514.6 sq.in ------------------ 33.2 sq.dm. Approximate flying weight--------------- 5.3-6.2 lbs -----------------------2.4-2.8kg. Length----------------------------------------- 46.1in ---------------------------------117cm. Recommended engine size------------ .40 - .46 cu.in ---------------------2-stroke.

  • Page 2: Instruction Manual

    . Flying the NEMESIS is simply a joy. This instruction manual is designed to help you build a great flying aeroplane. Please read this manual thoroughly before starting assembly of your NEMESIS. Use the parts listing below to identify all parts.

  • Page 3: Hinging The Ailerons

    This will ensure proper assembly as the NEMESIS is made from natural materials and minor adjustments may have to be made. The paint and plastic parts used in this kit are fuel proof.

  • Page 4: Hinging The Elevator

    Instruction Manual Nemesis 111 7) Repeat this process with the other wing AILERON CONTROL HORN panel, securely hinging the aileron in place. Aileron control horn installation: See pictures 8) After both ailerons are securely hinged, below firmly grasp the wing panel and aileron to make sure the hinges are securely glued and cannot be pulled out.

  • Page 5: Rudder Control Horn

    www.seagullmodels.com ELEVATOR CONTROL HORN. 2 sets. Install the elevator control horn using the same method as with the aileron control horns. 2 sets. M3x35mm. CONTROL HORN M3x35mm. M3 SCREW ALUMINUM WASHER Epoxy. CONTROL HORN M3 SCREW ALUMINUM WASHER Fuselage. Rudder. Epoxy.

  • Page 6: Engine Mount Installation

    Instruction Manual Nemesis 111 ENGINE MOUNT INSTALLATION. See pictures below.Make yourself the template of your engine on paper. M4 x 30mm. Mark and drill 4 holes for engine mount. Insert 4 blind nuts to firewall. Thread locker glue. Vent tube.

  • Page 7: Fuel Tank Installation

    www.seagullmodels.com Balsa wood not included. Fuel tank. 5) With the stopper assembly in place, the weighted pick-up should rest away from Vent tube. the rear of the tank and move freely inside the tank. The top of the vent tube should rest just below the top of the tank.

  • Page 8: Installing The Main Landing Gear

    Instruction Manual Nemesis 111 2) Follow diagram below for wheel pant installation: Landing Gear. wheel Pant. 4.2mm. 12mm. C/A glue. 42mm wheel collar. Locker glue. Axle. Washer. wheel. 3) A drop of C/A glue on the wheel collar screws will help keep them from coming lose during operation.

  • Page 9: Mounting The Engine

    www.seagullmodels.com MOUNTING THE ENGINE. 1) Install the pushrod housing through the predrilled hole in the firewall and into the servo compartment. The pushrod housing should protrude 1/4" out past the front of the firewall. Make a Z-Bend 1/4" from one end of the plain wire pushrod.
  • Page 10 Instruction Manual Nemesis 111 Trim and cut. Epoxy. Machine Screw M3x10mm. Balsa block. Epoxy. Electric Conversion (Ep Power) (OPTION). Epoxy. 115mm. 4mm.

  • Page 11: Spinner Installation

    www.seagullmodels.com Blind nut. Speed control. Electric motor. SPINNER INSTALLATION. M3x15mm. Battery. Battery. INSTALLING THE SWITCH. Install the switch into the precut hole in the side of fuselage. M3x15mm.

  • Page 12: Installing The Aileron Servos

    Instruction Manual Nemesis 111 Switch. Servo arm. INSTALLING THE AILERON SERVOS. INSTALLING THE FUSELAGE SERVO. Servos. Small weight. Elevator servo . Thread. Installing the aileron servo in place using the Throttle servo . same techniques used to flap servo. Rudder servo .
  • Page 13 www.seagullmodels.com Wing rib. Wing. Small Weight. M2x12mm. String. Attach the string to the servo lead and carefully thread it though the wing. 60mm. Wing. 8mm. Aileron. Snap keeper. AILERON PUSHROD INSTALLATION Servo arm. Cut. 60mm. Snap keeper. AILERON PUSHROD INSTALLATION...

  • Page 14: Installing The Horizontal Stabilizer

    Instruction Manual Nemesis 111 Wing. M2 lock nut. Aileron. Repeat the procedure for the other wing. INSTALLING THE HORIZONTAL STABILIZER. Pen. Removing the covering. Epoxy. Removing the covering. Epoxy.

  • Page 15: Installing The Vertical Stabilizer

    www.seagullmodels.com Hinge C/A glue. INSTALLING THE VERTICAL STABILIZER. ELEVATOR - RUDDER PUSHROD HORN INSTALLATION. Removing the covering. Elevator control. Epoxy. Elevator control. Rudder control.

  • Page 16: Installing The Battery

    Instruction Manual Nemesis 111 Control horn. M2 lock nut. Elevator pushrod. Metal clevis. Elevator pushrod. INSTALLING THE BATTERY. Battery. Rudder pushrod. Wire keeper. MOUNTING THE TAIL WHEEL. See pictures below. INSTALLING THE RECEIVER. Receiver. M2x20mm. M3x12mm.

  • Page 17: Wing Assembly

    www.seagullmodels.com BALANCING. WING ASSEMBLY. 1) It is critical that your airplane be bal- anced correctly. Improper balance will cause your plane to lose control and crash. The cen- 10cm ter of gravity is locate back from the leading edge of the wing, measured at wing tip.

  • Page 18: Preflight Check

    D) Check the rudder. Looking from be- 2) Check every bolt and every glue joint in the NEMESIS to ensure that everything is hind the airplane, move the rudder stick to the tight and well bonded. right. The rudder should move to the right. If it...

Table of Contents