Download Print this page

Advertisement

Quick Links

Dedicated A-BUS Control buttons plus 6 Banks with Code Library and
Learning Capabilities
A-BUS Buttons:
4 x Source Input, Volume Up/Down Off and All Off
Banks:
6 (All Bank Buttons will Learn Macros)
Buttons:
39 Keys per Bank (Not Including A-BUS)
Range:
< 50 feet (15m) (Depending on Source Component)
Code Library:
Extensive Infrared Code Library for Audio Video Products
Macros:
Any Button (Up to 32 Commands from any Other Button)
Batteries:
2 x AA batteries (Supplied)
Size (H x W x D):
1.4" (35 mm) x 2.6" (66 mm) x 8.4" (214 mm)
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the unit only in normal temperature environments.
• Handle the remote gently and carefully. Don't drop it.
• Wipe the remote with a damp cloth to keep it looking like new.
The A-BUS™ Universal Remote does not contain any user-serviceable parts. Opening the case, except for the battery cover,
may cause permanent damage to your A-BUS™ Universal Remote. Modifying or tampering with the internal parts can cause
damage and invalidate the warranty. If your remote is not performing as it should, please contact your place of purchase.

SPECIFICATIONS

Power: (2) AA
Size: (H x W x D) 8.43 x 2.64 x 1.38 in
(214 x 66 x 35 mm)
Weight: (w/o batteries) 5.6 oz (158.76 g)
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without any notice.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to
maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes
and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this
equipment.
07A02 M66400
A-BUS is a registered trademark of LeisureTech Electronics Pty Ltd.
All features and specifications are subject to change without notice.
All trademarks property of their respective owners.
Specifications

Additional Information

Universal Remote
Operation Manual

Advertisement

loading

Summary of Contents for LeisureTech A-Bus

  • Page 1: Specifications

    • Wipe the remote with a damp cloth to keep it looking like new. The A-BUS™ Universal Remote does not contain any user-serviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your A-BUS™ Universal Remote. Modifying or tampering with the internal parts can cause damage and invalidate the warranty.
  • Page 2: Installing Batteries

    20041, 20038, 20040 20307, 20468, 20124, Harwood 20072, 20068 20240, 20042, 20038, Teknika 20035, 20037, Thank you for purchasing an A-BUS™ Universal Remote. Your remote has a dedicated A-BUS 20406, 20348, 20479 Hauppauge 21992 21035, 20040, 20054, 20000, 20052 Akai...
  • Page 3: A Quick Look At The Controls

    11947, Sanyuan 10093, 10817 Tongguang 10264 Go Video 10886 10700, 10019, 10037, 10037, 10055, 10650, Scimitsu 10019 Toshiba 10154, 11256, o The A-BUS™ Universal Remote also GoldStar 10154, 10030, 10474, 11178, 10003, 11924, 11946, 11919, Scotch 10178 10156, 10060, 10145, Display the Menu for the selected device.
  • Page 4: Searching For Your Code

    Onkyo 20503, 20627, 01444, 01108, 01392, Anam National 10250, Daytron 10019 The A-BUS™ Universal Remote comes preset to allow independent volume control of each 20717, 20797, 21020, 21924, 20792, 21985 01443, 01640, 01442, 10161, 10055, 10650 Dayu 10391 21100, 20796, 21004,...
  • Page 5: System Design

    Manufacturer’s Codes Audio Amplifiers Daewoo 31250 Proscan 31254 Dumont 00637 Torx 00003 Dell 31383 Qisheng 31609, 31390 Eastern 00002 Toshiba 00000 Accuphase 30382 Denon 31360, 30004, Quasar 30039 Emerson 00797 Trans PX 00276, 00153, Acurus 30765 31104, 30771, 31311, RadioShack 31263 Everquest 00040, 00015 00315 Adcom 31100, 30577...
  • Page 6: Using Learning

    5. On the A-BUS™ Universal Remote, press a key where the learned function will be stored. SOLUTION: Due to RCA’s design from 1983 to 1987, only the original remote control will 6. On the original remote, press and hold the key to be learned. The A-BUS™ Universal Remote’s operate these functions.