Link Procedure - E-Mu LONGBOARD 61 Reviewer's Manual

LONGboard 61 / SHORTboard 49 Reviewer's Guide

Link Procedure

6
Link Procedure
On the Rear Panel of your Keyboard
1. Press the Connect button.
On the PIPEline
2. Press the Link/Connect button. The white LED will stop flashing when
connected.
3. Play the keyboard. You should now hear audio from the PIPEline!
• If you change channels, the keyboard and PIPEline will automatically
re-link. (Of course, the keyboard and PIPEline channels must match!)
• If you turn off the keyboard, PIPEline, or both; they will automatically
re-link when you turn them back on.
• You only have to perform the Link procedure again if you decide to link to a
different PIPEline, or if you decide to change Paired/Broadcasting modes.
E-MU Reviewer's Guide