Advertisement
6
SWING:
Press this button to set up & down swing angle, which circularly changes as below:
This remote controller is universal. If any command
indicates the guide louver swings as:
7
I FEEL:
Press this button to turn on I FEEL function. The unit automatically adjust temperature according to the sensed temperature. Press this
button again to cancel I FEEL function.
8
/
Press this button to achieve the on and off of healthy and scavenging functions in operation status. Press this button for the first time to
start scavenging function; LCD displays"
eously; LCD displays"
the button for the fourth time to start healthy function; LCD display "
SLEEP:
9
Press this button to go into the SLEEP operation mode. Press it again to cancel this function. This function is available in COOL , HEAT
(Only for models with heating function) or DRY mode to maintain the most comfortable temperature for you.
10
TEMP:
Press this button, could select displaying the indoor setting temperature or indoor ambient temperature.When the indoor unit firstly power
on it will display the setting temperature, if the temperature's displaying status is changed from other status to"
ambient temperature, 5s later or within 5s, it receives other remote control signal that will return to display the setting temperature. if the
users haven't set up the temperature displaying status,that will display the setting temperature.
11
TIMERON :
Press this button to initiate the auto-ON timer. To cancel the auto-timer program, simply press this button again.
After press of this button,
to adjust the time value. Every press of either button changes the time setting by 1 minute. Hold down either button to rapidly change the
time setting by 1 minute and then 10 minutes. Within 5 seconds after setting, press TIMER ON button to confirm.
12
CLOCK :
Press CLOCK button,
2 seconds to increase or decrease the time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second. During blinking after
setting, press CLOCK button again to confirm the setting, and then
TIMER OFF :
13
Press this button to initiate the auto-off timer. To cancel the auto-timer program, simply press the button again. TIMER OFF setting is the
same as TIMER ON.
14
TURBO:
Press this button to activate / deactivate the Turbo function which enables the unit to reach the preset temperature in the shortest time. In
COOL mode, the unit will blow strong cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air at super high
fan speed.
15
LIGHT:
Press LIGHT button to turn on the display's light and press this button again to turn off the display 's light. If the light is turned on ,
displayed. If the light is turned off,
16
X-FAN:
Pressing X-FAN button in COOL or DRY mode, the icon
to dry the indoor unit even though you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
17
Combination of "+" and "-" buttons: About lock
Press "+ " and "-" buttons simultaneously to lock or unlock the keypad. If the remote controller is locked,
pressing any button,
18
Combination of "MODE " and "-" buttons :
buttons simultaneously to switch between ℃ an d ℉ .
19
Combination of " TEMP " and "CLOCK" buttons : About Energy-saving Function
Press "TEMP" and "CLOCK" simultaneously in COOL mode to start energy-saving function. Nixie tube on the remote controller displays
"SE". Repeat the operation to quit the function.
20
Combination of " TEMP " and "CLOCK" buttons : About 8℃ Heating Function
OFF
". Press the button for the second time to start healthy and scavenging functions simultan-
" and "
" . Press this button for the third time to quit healthy and scavenging functions simultaneously. Press
disappear sand " ON " blinks .00:00 is displayed for ON time setting. Within 5 seconds, press + or - button
blinking. Within 5 seconds, pressing + or - button adjusts the present time. Hold down either button for above
disappears.
blinks three times.
About switch between Fahrenheit and centigrade At unit OFF, press "MODE" and "- "
,
or
is sent out,the unit will carry out the command as
". Press this button again to repeat the operation above.
will be constantly displayed.
is displayed and the indoor fan will continue operation for 10 minutes in order
",displays the
is
is displayed. In this case,
Advertisement
