Asus P5GC-TVM SE Manual page 18

2. Press the load lever with your thumb (A) and move it to the left (B) until it is
released from the retention tab.
Retention tab
Load lever
To prevent damage to the socket pins, do not remove the PnP cap unless you
are installing a CPU.
. Lift the load lever in the direction of
the arrow to a 15º angle.
. Lift the load plate with your thumb
and forefinger to a 100º angle (A),
then push the PnP cap from the load
plate window to remove (B).
5. Position the CPU over
the socket, making sure
that the gold triangle is
on the bottom-left corner
of the socket. The socket
alignment key should fit into
the CPU notch.
1-
A
B
Load plate
Alignment key
CPU notch
Gold triangle mark
Chapter 1: Product introduction
PnP cap
This side of the socket box
should face you.
B
A