1. Manuals
  2. Brands
  3. Kaltech Manuals
  4. DVR
  5. DW-709
  6. Manual

Kaltech DW-709 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
D D W W - - 7 7 0 0 9 9 / / 7 7 1 1 6 6 M M a a n n u u a a l l
•This manual is published by Kaltech and contains information on DW-709/716 which will
enable you to use this product properly.
• If you require additional copies of this manual, please print the manual contained in the CD
provided with your purchase.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DW-709 and is the answer not in the manual?

Questions and answers

Summary of Contents for Kaltech DW-709

  • Page 1 D D W W - - 7 7 0 0 9 9 / / 7 7 1 1 6 6 M M a a n n u u a a l l •This manual is published by Kaltech and contains information on DW-709/716 which will enable you to use this product properly.
  • Page 2 I I n n t t r r o o d d u u c c t t i i o o n n Thank you for purchasing Kaltech DW-709/716 . This DVR is produced by the most advanced Kaltech technology and its quality is guaranteed by strict reliability and compatibility testing.
  • Page 3 Digital Watchdog, DW-Pro, and High Definition Digital Recorder are registered trademarks of • Kaltech can not be held responsible if the DVR is damaged due to the product being Kaltech Enterprises Inc in the United States and elsewhere; Windows, and Windows 2000 are registered trademarks of Microsoft Corporation;...
  • Page 4 Kaltech Enterprises and this License does not grant any rights in such business. Each permitted copy of the SOFTWARE may be used only in connection with a software.
  • Page 5 SOFTWARE from its computers and shall either Kaltech Enterprises agrees to pass on the End User any warranties of the owner of licensor to the surrender the SOFTWARE and the associated documentation, together with all copies in extent permitted by the owner or licensor.
  • Page 6 ABOVE, BY REASON OF ANY REPRESENTATION OR IMPLIED WARRANTY, CONDITION, OR defense of the claim, Kaltech Enterprises shall in its discretion and at its own cost wither compromise OTHER TERM OR ANY DUTY AT LAW, OR UNDER THE TERMS OF THIS AGREEMENT, FOR...
  • Page 7 Software, even if Kaltech Enterprises or its Licensor's have been advised of the possibility of such damages. Because some states/ countries do not allow the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you.

  • Page 8: Important Safety Instructions

    Never insert foreign objects into the DW-Pro unit, other than the media types approved by Kaltech Enterprises, as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the product.
  • Page 9 11. Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious personal injury and serious damage to the product. �When shipping the DW-Pro unit, the original This DW-Pro unit is designed to last for long periods 12.

  • Page 10: Warranty Information

    Equipment Kaltec Electronics (referred to as “the Warrantor”) warrants the Digital Video Recorder against Please check to make sure the following equipment are included when you purchased DW-709/716. If any defects in materials or workmanship as follows: items are missing, contact your dealer.

  • Page 11: Table Of Contents

    C C o o n n t t e e n n t t s s C C o o n n t t e e n n t t s s 5.3.2 Selecting cameras and changing graph bar line ……………………21 Chapter 1.
  • Page 12 C C o o n n t t e e n n t t s s 7.4.1 Recording Setup …………………………………………………………54 2.2 PSTN (telephone line) Connection (optional) ……………………………81 3. RX Receiver (KRE-303) Connection Diagram (optional) 7.4.2 Motion detection …………………………………………………………55 7.4.3 Motion Link setting ………………………………………………………56 3.1 Name of Each Part and Description…………………………………………82 4.

  • Page 13: Chapter 1. Guide

    1. Guide 1. System Overview 2. Surveillance mode 3. Menu Operation 4. Pan/Tilt Camera 5. Search 6. Backup 7. System Setup 8. Controls - Manual Control...

  • Page 14: Front Panel

    1. Guide 1. System Overview 1. System Overview 1.1 Front Panel The following describes the keys and ports on the front of the system and their functions : 9 10 4 1 3 [Figure 1-1. System front view] ① [Directional Keys] •...

  • Page 15: Rear Panel

    • A standard HP PostScript computer • Press the keys to enter correct numeric password when accessing Setup or printer can be connected to USB port of Search modes. DW-709/716 to print out any still image. 9 15 ☞ [Note] Removable Disk ⑦ [Auto] �The table below lists compatible USB...
  • Page 16 1. Guide 1. Guide 1. System Overview 1. System Overview ④ [Sensor Input Port] ⑪ [Audio Out] •External sensor inputs for channels 1~4. •Replay of recorded Audio. •The system supports NC and NO sensor types. ⑫ [External modem terminal] NOT AVAILABLE IN EUROPEAN MODELS ⑤...

  • Page 17: Description Of The Remote Controller

    1. Guide 1. Guide 1. System Overview 1. System Overview 1.3 Description of the Remote Controller � [ I MAGE NPUT UTPUT WITCH Below picture shows the description of each feature in remote control. All the feature is same • Image Input/Output terminal options with the front buttons in the system.

  • Page 18: Surveillance Mode

    1. Guide 1. Guide 2. Surveillance Mode 2. Surveillance Mode 2. Surveillance Mode 2. Surveillance Mode 2.1 Screen Layout 2.2 Enabling full screen and sequence modes [To Select Full Screen mode] •Press any key 1~16 on the system to enlarge that camera channel and view in full screen.

  • Page 19: Menu Operation

    1. Guide 1. Guide 3. Menu Operation 3. Menu Operation 3. Menu Operation 3.1 Using menu in live mode 3.2 Using menu on PAN/TILT mode Pop-up menu appears when you click right mouse button on surveillance, search or This menu appears by selecting a full channel that supports P/T camera in surveillance Pan/Tilt mode mode.

  • Page 20: Using Menu On Playback Mode

    1. Guide 1. Guide 3. Menu Operation 4. Pan/Tilt Camera 4. Pan/Tilt Camera 3.3 Using menu on playback mode 4.1 Switching to Pan/Tilt control mode This menu appears only when you click right mouse button while playing back recorded images. [Pan/Tilt Camera Control] ( See page 23 for how to playback of recorded images.

  • Page 21: Pan/Tilt Camera Control

    1. Guide 1. Guide 4. Pan/Tilt Camera 4. Pan/Tilt Camera 4.2 Pan/Tilt Camera Control 4.3 Supported Pan/Tilt Camera List Manual In P/T/Z menu, you can switch the P/T/Z camera controls to manual control, as Manufacturer Model Name Speed Zoom Focus Speed Preset Control...

  • Page 22: Search

    1. Guide 1. Guide 5. Search 5. Search 5.1 Accessing Search Mode 5.2.1 Graph color display To access Search mode, press Search button on the system. You will then be asked to enter password as shown below : �Recorded data shown on the time graph will �Use the [number] keys to enter the correct 4- be displayed in different colour depending on digit password, then press [Enter] (The system...

  • Page 23: Selecting Date And Time

    1. Guide 1. Guide 5. Search 5. Search 5.3 Selecting date and time 5.3.1 Selecting date � To select the date you wish to view, use the �After selecting the date you wish to view, Color Description Example directional keys to select [Date] button, then press the [OK] button to return to Search •...

  • Page 24: Audio Output

    [Figure 5-7. Selecting audio] [Figure 5-8. Search mode display] screen size. ☞ [Note] �DW-709/716 support only one audio channel. [Changing playback speed] �To play the recording, press button. (Reverse Play) : Play the recording in reverse.

  • Page 25: Backup

    CD-RW, USB HDD, or a portable hard drive such as USB memory stick. The backup bar. files can be saved as AVI, BMP, JPEG, or KDB (Kaltech Data Base) formats. �When no USB drive is connected, the system will return to Search mode display.
  • Page 26 ☞ [Note] Supported USB versions �DW-709/716 supports USB 1.1. USB 2.0 devices are also supported but at USB 1.1 speed. �Recommended portable USB Hard Disk Drives include Iomega and Noble. �It is possible to burn the image data onto CD-RW or CD-R media up to 100 times, but it varies...

  • Page 27: Saving Backup Using Remote Drive

    AVI, BMP, JPEG, or KDB (KODI COM data base) formats. ① [Backup mode – Video] �To select KDB (Kaltech data base) or AVI backup mode, use the mouse or the directional keys on the system to highlight [Backup mode], then use the mouse wheel or the jog/shuttle to select the option.

  • Page 28: Printing Still Image

    1. Guide 1. Guide 6. Backup 6. Backup 6.3 Printing Still Image �It is possible to print out the recorded image using the printer that supports PostScript. Choose the camera to print out while playing back the recorded and press [OK]. If you click [Backup] button in the search screen below image will appear.

  • Page 29: System Setup

    1. Guide 1. Guide 7. System Setup 7. System Setup 7. System Setup 7.1 Accessing Setup mode To access Setup mode, press Setup button on the system. You will then be asked to enter password as shown below: Main Menu Setting Options Description Password...

  • Page 30: System Setup

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.3 System Setup 7.3.1 Password 7.3.2 Site Information �Select [Password] in system Setup menu to �In [Site Information], you can change change password. the [Site Code], [Date Type], and [Time Setup] options.

  • Page 31: Software Upgrade

    [Package Select] �You can upgrade the system program [Figure 7-10. Software Upgrade] by using a portable storage device to be recognized by DW-709/716. The [Date Type] upgrade package must be in a folder �You can change the date display format.

  • Page 32: Log Information

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.3.4 Log Information [Time] �In [Log Information] menu, you can view �Select [Time] to change time to view log the log information on Setup history, information recorded on different date/time. Search history, network connection �Change [Start Time] and [End Time] using history, and backup history.

  • Page 33: Osd/Dwell Time

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.3.5 OSD/Dwell Time [Network] �You can change the options on OSD-On �Whenever the system is connected through Screen Display-and sequence time network by remote Center program, the function. system will record the IP address and the date and time the connection is made.

  • Page 34: System Management

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.3.6 System Management �Select “Network Management” to check �System Management allows you to check the network status or to restart DDNS network connection status, certify authentication and click [OK] button. Dynamic DNS (DDNS), Options, change Video input Type, and format HDD.
  • Page 35 1. Guide 1. Guide 7. System Setup 7. System Setup �Select “Options” to set a warning beep in case �To use the DDNS service, select “DDNS of video loss or to set the watermark in video Authentication” and click the [OK] data and click the [OK] button.
  • Page 36 1. Guide 1. Guide 7. System Setup 7. System Setup �To renew the HDD installed in the �Select the vido-in type to check the type of image input and click the [OK] button. system, select “HDD Management” and click the [OK] button. [Figure 7-30.
  • Page 37 1. Guide 1. Guide 7. System Setup 7. System Setup �The system will display a warning message. [Caution] To confirm and proceed with formatting the �Any newly installed HDD must be formatted. selected HDD, press [OK] button. To cancel �Formatting will erase all data stored in the selected HDD. Please make sure you have format and return to HDD table, select saved all important data before proceeding with HDD format (see page 24 for details on [Cancel] button.
  • Page 38 1. Guide 1. Guide 7. System Setup 7. System Setup � � N N T T P P S S e e r r v v e e r r l l i i s s t t �To receive the international standard time data from the NTP(Network Time I I S S O O A A r r e e a a...

  • Page 39: System Shutdown

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.3.7 System Shutdown �In [System Shutdown] menu, you can [Add schedule] safely shutdown, restart or schedule a �You can set the time and the system will reboot of the system. automatically restart.

  • Page 40: Recording Setup

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.4 Recording Setup 7.4.1 Recording Setup 7.4.2 Motion Detection �In [Motion Detection] menu, you can set motion �In [Recording] setup menu, you can detection area, set motion sensitivity, and enable change the color, brightness, contrast, and or disable alert sound(beeping).

  • Page 41: Motion Link Setting

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.4.3 Motion Link Setting 7.4.4 Schedule [Motion link setting] �In [Schedule] menu, you can set �You can set a motion-link recording for each camera. automatic schedule for each camera and �When the camera detects movement in the motion-detection area, the linked camera will their recording mode.

  • Page 42: Quality/Resolution

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.5 Camera Setup 7.4.5 Quality/Resolution �In [Camera] setup menu, you can setup Pan/Tilt mode and change the connection setting between sensors and controls. �In [Quality/Resolution] menu, you can change the video quality and resolution by using the mouse wheel or the jog/shuttle.

  • Page 43: Camera Name

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.5.1 Camera name 7.5.2 Sensor setting �Press [Input] button next to [Camera �In [Sensor setting] menu, you can select a name] option to give the selected camera sensor type for any of 4 connected a name.

  • Page 44: Sensor/Control Link

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.5.3 Sensor/Control link 7.5.4 Sensor/Camera Link �In [Sensor/Control link] menu, you can �In [Sensor/Camera Link] menu, you can link a sensor with controls and set control link cameras to Sensors. time.

  • Page 45: Network Setup

    [ S i t e I P ] �You can designate any sensors connected to �Enter the system’s IP address for connecting DW-709/716 into Alarm sensors by DW-709/716 to a remote Center via LAN (see selecting the sensor numbers on [Alarm page 65 for details). Sensor] option.
  • Page 46 1. Guide 1. Guide 7. System Setup 7. System Setup [Subnet mask/Gateway setup] [Center Tel No. setup](Not in Europe) �To use Subnet mask or Gateway, you must �When using modem, you must enter the enter the IP address. telephone number of the computer installed �The IP address must match with the Subnet with the Center Program.

  • Page 47: Backup Schedule

    1. Guide 1. Guide 7. System Setup 7. System Setup 7.7 Backup Schedule 7.7.1 Adding Backup schedule �In [Backup Schedule] menu, you can set �To add a backup schedule to the list, select up a system backup schedule so that the [Add] button.
  • Page 48 1. Guide 1. Guide 7. System Setup 7. System Setup [Start Time / End Time] [Target Drive – Remote Drive] �Use the mouse wheel or the jog/shuttle to �To select [Start Time] and [End Time], use select Remote Drive. the mouse or the directional keys to select �If the system is connected through LAN or the time and date, then use the mouse Internet line, you can save a remote drive...
  • Page 49 1. Guide 1. Guide 7. System Setup 7. System Setup [Connecting] [Backup Schedule List] �Press the [Connect] button to connect the �You will see the added schedule on the system to the receiving PC or fileserver in Backup Schedule list. Select [OK] button to order to save a remote drive backup.

  • Page 50: Deleting Backup Schedule

    1. Guide 1. Guide 7. System Setup 8. Controls – Manual Control 8. Controls – Manual Control 8.1 Switching to Control Mode 7.7.2 Deleting Backup Schedule If you wish to use the control devices manually, select the 16-splitscreen mode in Surveillance �To delete a schedule from the list, select mode, then press Enter key.

  • Page 51: Rx Receiver (Kre-303) Connection Diagram (Optional)

    2. Installation 1. Pan/Tilt Connection 2. Connecting LAN/PSTN Communication Lines 3. RX Receiver (KRE-303) Connection Diagram (optional) 4. External Sensor Connection (Input) 5. Control Port Connection (Output) 6. Adding HDD 7. HDD Smart Check...
  • Page 52 (Used for connecting RX-Receiver) [Caution] �Please beware of (+ve) and (-ve) poles of the signal cable when connecting. A Wrong connection may cause malfunction to the system. �If you wish to use an RX-receiver not manufactured by Kaltech, please contact your dealer beforehand.
  • Page 53 2. Connecting LAN/PSTN Communication Lines 2. Connecting LAN/PSTN Communication Lines 2.2 PSTN (telephone line) Connection (options) (Not available Europe) 2.1 LAN and Dedicated Line Connection (DW-716) (DW-716) (Use for connecting to DW-709/716 UTP port) MODEM Center PC (DW-709/716 RS-232 connection) Router Internet Network &...
  • Page 54 2. DVR Installation 2. DVR Installation 3.RX Receiver Connection Diagram 3.RX Receiver Connection Diagram 3. RX Receiver (KRE-303) Connection Diagram (optional) 3.1 Part Name and Description 1 . Turns “ON” when polarity of data lines connected correctly. 2 . Used for ON-OFF of the cross resistance according to the international standard, EIA-485. 3 .
  • Page 55 2. DVR Installation 2. DVR Installation 4. External Sensor Connection (Input) 5. Control Port Connection (Output) 4. External Sensor Connection (Input) 5. Control Port Connection (Output) (DW-716) (DW-716) CONTROL SENSOR Alarm Light, Amplification Siren, External Power ( DC12V ) External Relay, Etc. �During automatic control of an external sensor, the control output port is “interworked”...

  • Page 56: Installing New Hdd

    2. DVR Installation 2. DVR Installation 6. Adding HDD 6. Adding HDD 6. Adding HDD 6.1 Installing new HDD 6.2 Checking HDD Database �Turn the system off and install the new HDD �If the newly installed HDD database does not into the system.

  • Page 57: Hdd Smart Check

    2. DVR Installation 7. HDD Smart Check 7. HDD Smart Check 7.1 HDD Smart Check This is a function to notify the user possibilities of HDD crash in advance. This, by advance warning, is to protect the HDD from losing data or crashing that may come from bad A ppendix sector or overheating.
  • Page 58 1.1 How to run Viewer ① When you insert the CD containing KDB (Kaltech Data Base) data in CD-RW, it will start by autorun. If you do not have autorun on your PC, you can access the viewer file by double clicking the Viewer folder.
  • Page 59 �The number of images to be skipped are set by Pink bar indicates 'Continuous Recording', [Move] an internal value of the DW-709/716 software. While you are searching recorded data, Blue bar indicates 'Motion Recording', Click right mouse button and drag to...
  • Page 60 DW-709 : NTSC( Max 117 Frame/Sec), PAL(Max 99 Frame/Sec) • • Select DW-709 or DW-716 which contains backup data, then select the site you wish to DW-716 : NTSC( Max 112 Frame/Sec), PAL (Max 96 Frame/Sec) •...
  • Page 61 • ☞ Check to make sure the monitor is turned on. drive through network ☞ Check if the video output cable of DW-709/716 DVR is properly connected to the monitor. ▶ Power : ☞ Unplug the power cable and plug in again.
  • Page 62 6. Damaged due to an engineer not employed by Kaltech modifying the system. ☞ Check if the video cable connecting the camera to DW-709/716 DVR system is the correct video cable. When a normal power-supplying cable is used instead of the video cable, �...

This manual is also suitable for:

Dw-716

Table of Contents