Table of Contents
Advertisement
SETTING/RECALLING RADIO PRESETS (UP TO 10 PRESETS EACH BAND)
1
1
Press the POWER button ‚ to turn
the unit on. Press the Function button
ƒ to select Radio.
3
1
Press the MEMORY button ‚ once;
"P1" will appear in the display. Press
the REPEAT/MEMORY UP button ƒ
repeatedly until the desired memory
number appears on the display. Press
the MEMORY button‚ again to set the
station in the selected memory.
TO INSERT AND REMOVE A CD
1
OPERATION (CONTINUED)
2
2
2
Press the STOP (I)/BAND button to
select the AM or FM band. Tune a
station as described on the previous
page.
3
Repeat steps 2 and 3 to program up to
10 station in each band, if desired.
TO RECALL, simply press the
REPEAT/MEMORY UP button until
the desired memory number appears.
Open the CD Compartment Door by
pressing down on the CD Door OPEN
switch. Gently push a disc, label side up,
onto the spindle until it locks in place
and close the CD Compartment Door.
To remove, press the CD Door OPEN
switch again and Hold the edge of the
CD and pick it up. Close the CD
Compartment Door.
10
Advertisement
Table of Contents
