Do you have a question about the PKC0BJ and is the answer not in the manual?
Questions and answers
Summary of Contents for Peak PKC0BJ
Page 1
Portable Power System Model No.: PKC0BJ Owner’s Manual and Warranty Information Read these instructions completely before using this product. Retain this Owner’s Manual for future reference. P/N XXXXX, 3/09...
CONTENTS SAFETY PRECAUTIONS ........................... 2 Portable Power System Safety ......................2 Battery Jump-Starting Safety ......................2-3 INTRODUCTION ............................4 FEATURES ..............................4 OPERATION ............................... 4 Checking Portable Power System Battery Status ................4 Low Charge Alert (LCA) ........................5 Charging Portable Power System Battery ..................5 110/120-Volt AC Charging .......................
Page 3
• Do not expose battery to fi re or intense heat, since it can explode. • Before recycling or disposing of a battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in personal injury or fi re). •...
Please keep this manual on fi le for future reference. FEATURES • Built-in 450-amp battery jump-starter (900 peak amps) with quick storing cables and clamps • Built-in 260 psi air compressor and quick storing hose to infl ate vehicle tires and sport leisure equipment •...
Two lights illuminate (green) 75-100% charged One light illuminates (green) 50-75% charged One light illuminates (yellow) 25-50% charged One light illuminates (red) 5-25% charged Low Charge Alert (LCA) On the front of the unit there is a Low Charge Alert port. There is a red plug in this port. With the plug removed, when the battery needs to be charged a continuous tone will sound telling you the battery level is low and the Portable Power System needs to be charged.
EXPLOSION HAZARD Never allow the jump-start cable clamps (red and black) to touch each other or another common metal conductor. This could cause damage to the unit and/or create a sparking/explosion hazard. Always switch off the jump-starter ON/OFF switch and store the jump-start clamps on the appropriate case clamp posts on the back of the unit after use.
Operating a DC Device Remove the protective cover from the DC power socket. Plug the 12-volt DC appliance into the power socket. Turn on the 12V DC Power & USB ON/OFF switch, then turn the appliance on (if required). If the appliance draws more than 10 amps (or has a short-circuit defect), the internal circuit breaker of the Portable Power System shuts off the power to the appliance.
Manufacturer warrants to the original consumer, or purchaser, that the PEAK® Portable Power System 450 PKC0BJ will be free from defects in material and workmanship for ninety (90) days from the date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other warranties, expressed or implied, beyond those warranties specifi...
Need help?
Do you have a question about the PKC0BJ and is the answer not in the manual?
Questions and answers