Adtec edje 4111 Quick Start Manual

R 4111
Digital Media Player
Getting Started
Thank you for your purchase of the Adtec edje 4111. This quick
start guide should help you with your initial setup. Advanced users can
find direct API command help as part of the on-board web application.
You can view it by looking for the HELP tab once your unit is powered
up and you are connected to the web-application. See back for more
details.
System LED Status
Power
Multicast
Power is OFF
Power is ON
Ethernet
Alarm
No Network Traffic
No System Alarm
Network Traffic Present
Minor Alarm
Major Alarm
Video
No Video Present on Output
Video Present on Output
Additional support can be provided through our Customer Support Department.
Telephone: 615.256.6619
Email: support@adtecinc.com
Internet: www.adtecinc.com/supportrequest/
The most recent firmware is available on our support website www.adtecinc.com.
Not Recieving Multicast
Recieving Multicast
Front Panel Menus:
System Decoder
Use Mode Button to move through top layer menus.
Use select to enter into edit mode and
Login Status
Duration
Target
Network
Hue
Video
Time
NTP
Audio
Track
Alarm
Multicast Mode
Mirror
COM2
Firmware
Quick Start Guide
Use arrows for navigation in submenus.
enter to save selection.
Brightness Contrast Saturation
Volume SPDIF
IP Port
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
'User Login -- logged out'
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>