Advertisement
B
pairing to Your hearing
inStrumentS
NoTe! check with your hearing healthcare
professional to determine if your instruments have
been pre-paired. instruments that have been pre-
paired do not need to be paired again.
1.
Make sure the TV streamer is plugged into
a wall socket and that the green power light
is on.
2.
Your hearing instruments must be turned off
with the battery doors opened.
3.
press the pairing button on the TV streamer
once to activate the pairing mode.
4.
You can tell that the pairing mode has been
activated when channel indicator light #1 is
flashing. pairing mode will be activated for 30
seconds.
5.
While the channel indicator light is flashing,
close the battery doors of both hearing
instruments.
6.
successful pairing will be indicated by an
audible melody played in both hearing
instruments. You are now ready to use
the TV streamer!
pairing To a second
or Third resound TV
sTreaMer
it is possible to pair up to three TV streamers
with a given pair of hearing instruments.
To pair a second TV streamer:
• Follow steps 1 and 2 above.
• Then press the pairing button of the second
TV streamer two times.
• Channel indicator light #2 will begin flashing.
• Finish the second pairing by closing the battery
doors on the hearing instruments.
a third TV streamer can be similarly paired by
pressing the pairing button three times and
completing the procedure as described above.
1
2
4
3
5
Channel
indicator
light #2
Channel
indicator
light #3
C
orienting the reSound tV
Streamer in a VerticaL poSition
options for vertical positioning:
• Place the TV streamer in the table stand
provided.
• Mount it to the wall with hardware
provided.
• Velcro it to the TV.
D
LiStening to Sound from
Your reSound tV Streamer
after setting up and pairing, you can listen to
sound from the TV streamer as follows.
To sTarT lisTening To
a sTreaMer prograM
With your TV, sound system or computer
turned on ...
either: press and hold the push button
on your hearing instrument for 3 seconds;
or: press the streamer button on the remote
control.
When using the optional remote control, the
display will show that it is searching, and then
indicate that it is connected to the TV streamer.
once you have selected a TV streamer listening
program, a melody of beeps will be heard in
your hearing instrument.
To sTop lisTening To
a sTreaMer prograM
either: Quickly press and release the push
button on your hearing instrument;
or: press the "p" button on the remote control.
Streamer
button
Searching for TV
Connected to TV
Advertisement
