Table of Contents
Advertisement
Powering On/Off
To power on the phone, press and hold the End Key until the LCD screen
lights up.
If the phone lock code has been activated, the phone will prompt you to
enter the code. The default lock code for an inactivated phone is 0000.
Once you have activated your phone, the default lock code will be the last
4 digits of your phone number.
Note: It is also possible that the lock code has been updated by the user.
If the updated lock code is lost or forgotten, please contact your service
provider.
To power off the phone, press and hold the End Key until the display
turns off.
Warning: Do not power the phone on when wireless phone use is prohibited,
or when it may cause interference or danger.
Locking/Unlocking the Keypad
To lock the keypad, press and hold the # Key in standby mode.
To unlock the keypad, press the Right Soft Key and then press the # Key.
11
Advertisement
Table of Contents
