HTC Desire 626 User Manual page 261

2. If you don't see your headset listed, tap Scan for devices to refresh the list.
3. Tap the name of your headset in the Available Devices section.
HTC Desire 626 pairs with the headset and the headset connection status is
displayed in the Paired Devices section.
4. If prompted to enter a passcode, try 0000 or 1234, or consult the headset
documentation to find the passcode.
When the Bluetooth headset is connected, you'll see
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on
HTC Desire 626, and then turning on the headset.
However, you might have to connect manually if your headset has been used with
another Bluetooth device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off
2. Tap the headset's name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the headset
documentation to find the passcode.
If you still cannot reconnect to the headset, follow the instructions in
Bluetooth device on page 262, and then follow the steps under
headset on page 260.
in the status bar.
on page 260.
Wireless sharing
Unpairing from a
Connecting a Bluetooth
261