Selecting A Language; Selecting A Playback Audio Setting - Toshiba SD-1200 Service Manual

Selecting a Language

You can select a preferred language and sound recording system from those
included on the DVD video disc.
Good morning! Bonjour!

Selecting a playback audio setting

DVD
1 Press AUDIO during playback.
AUDIO The current audio setting is
displayed for about 3 seconds.
Position
number
Audio :
ENG
1
Audio Out Select Bitstream
Output sound format
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations.
Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the
AUDIO button repeatedly during playback.
Output sound conversion table (sampling frequency/quantization bit)
Recording system
Discs
Dolby Digital
48 kHz/16 bit
48 kHz/20 bit
48 kHz/24 bit
DVD video
Linear PCM
96 kHz/16 bit
discs
96 kHz/20 bit
96 kHz/24 bit
DTS
MPEG2
VIDEO CDs MPEG1
Linear PCM 44.1 kHz/16 bit
Audio CDs
DTS
¡Buenos días!
2
Language
Recording system
Audio channel
PCM 2 CH
:
39
42
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting
When you select a sound track which is not included on the
disc, the DVD video player plays a prior sound track
programmed on the disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
Audio selection from the menu
"Bitstream"
BITSTREAM/PCM ANALOG AUDIO
jack OUT jacks
Bitstream 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit
Bitstream
Bitstream
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream (Noise)
Press AUDIO or while the audio
setting is displayed on the TV screen.
AUDIO Each time you press the AUDIO or
button, the audio settings included
on the DVD video disc change.
e.g.
Audio :
ENG PCM 2
1
ENTER
Audio :
FRE
2
Audio :
SPA PCM 2
3
: Cycles backwards
If you press the
can select output sound format.
To turn off the audio setting display, press the
CLEAR button.
and output jacks on the rear panel
35 39
"Analog 2ch"
BITSTREAM/PCM ANALOG AUDIO BITSTREAM/PCM
jack OUT jacks
Bitstream 48 kHz/20 bit 48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit 48 kHz/16 bit
48 kHz/24 bit 48 kHz/16 bit
96 kHz/16 bit 48 kHz/16 bit
96 kHz/20 bit 48 kHz/16 bit
96 kHz/24 bit 48 kHz/16 bit
Bitstream
Bitstream 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream (Noise) Bitstream
: 3-D (N-2-2) sound enhancement can function.
1, 2
2
CLEAR
CH
D 2 CH
CH
/ buttons, you
39
.
37
"PCM"
ANALOG AUDIO
jack OUT jacks
48 kHz/16 bit
48 kHz/20 bit
48 kHz/20 bit
48 kHz/16 bit
48 kHz/20 bit
48 kHz/20 bit
44.1 kHz/16 bit
(Noise)
33