nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
8.) Unscrew the seven Torx Plus
shown order.
For assembly, the reverse order and a
torque driver with a torque of 25Ncm has to be used.
10.) Open the display connector with SRT-6 carefully.
Take care about the surrounding components.
12.) Release the Display Shield with a slotted
screwdriver.
14.) Protect the Display with a film.
Service Manual 6680 Level 1&2
PAGE 13 (26)
CONFIDENTIAL
size 6 screws in the
®
9.) Lift the UI FRAME ASSY a bit and flip it up carefully.
11.) The Display Shield is locked to the UI-Frame in the
shown places.
13.) Remove the Display Shield.
15.) Remove the Display.
Copyright © 2005 Nokia Corporation. All rights reserved.
Approved 1.0
DJK
22.02.2005