Page 2
1 Headset ‘ON/OFF’ LED 2 Headset ‘ON/OFF’ button 3 Power LED 4 Headset charge LED 5 Headset ‘IN USE’ LED 6 Battery LED indicator 7 Microphone volume up 8 Microphone volume down 9 AUX port 10 Power socket 11 Handset connector 12 Telephone connector (‘TEL’...
Contents: Product description Setup 2.1 Connecting to a telephone or terminal with a headset port 2.2 Connection to a telephone or terminal without a headset port 2.3 Connecting to a compatible handset lifter (refer to your supplier) 2.4 Wearing style Operation 3.1 Making and receiving calls 3.1.1 Making an outgoing call...
Product description The Emotion DECT is a fully wireless headset solution offering the user the ability to work ‘handsfree’ with true wireless mobility. Main features: • DECT wireless headset solution • Convertible into two wearing styles: headband and earhook •...
2.1 Connecting to a telephone or terminal with a headset port • Using the headset cord supplied with the product, connect the ‘TEL’ port (12) on the headset base with the headset port on your telephone. • Use the power adaptor supplied with the product to connect the headset base (10) to a power socket.
2.4 Wearing style Your Emotion DECT headset is supplied with a headband and an earhook. • Headband This can be attached to the headset to allow for either left or right ear wearing and the size can be adjusted to allow the user to find the most comfortable fit.
3.1.2 Receiving an incoming call • If there is an incoming call from the telephone line and the headset base is connected to a handset lifter or electronic hookswitch device, the headset LED (1) will flash, also a ring tone will be heard on the headset.
Two LEDs on 40%-60% Three LEDs on 60%-80% Four LEDs on 80%-100% 3.8 Making a conference call Your Emotion DECT headset allows a second headset to be temporarily connected to the base so that you can have a three way conference call.
• Setup the call using the primary headset unit. • Once on the call, place the second Emotion DECT headset unit on the base charger. • After about one second, the headset ‘IN USE’ LED (1) of the new headset will turn on and the base ‘IN USE’...
3.10 Registering a new headset to the base You can register a new primary headset unit to your Emotion W860 base using the following procedure. • Push the ‘headset registration’ button (18) on the front panel of the base station to enter the registration mode.
Page 13
(if the telephone has one). Health and safety instructions Please read the following safety and operational instructions before using your Emotion product. Please keep these instructions for your reference. When using this product, these basic safety precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to persons and damage to property.
Page 14
• Discontinue use of product and contact Emotion if the product overheats, has a damaged cord or plug, if the product has been dropped or damaged, or if the product has come into contact with liquids.
Page 15
Charging warnings • Use only the charger supplied by Emotion to charge the product. Do not use the charger for any other purpose. Ensure that the voltage rating corresponds to the power supply you intend to use.
Page 16
• Avoid charging the battery while it is unattended. Headset battery warnings The headset is equipped with a replaceable battery. To reduce the risk of fire or injury to persons read and follow these instructions. Do not attempt to open battery in a fire. The battery may explode.
Page 17
Europe Declaration This product is CE marked according to the provisions of the R and TTE Directive (99/5/EC). This product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Safety: EN 60 950-01:2006+A11:2009 EMC: EN 301 489-6 V1.3.1:2008-08 EN 301 489-1 V1.8.1:2008-04 EN 55022:2006+A1 EN 55024:1998+A1+A2...
Need help?
Do you have a question about the W860 and is the answer not in the manual?
Questions and answers