Advertisement
This insert applies for models 40011 and 40012
with memory functions
Program your own roasting curve:
You may set as many as 5 roasting stages. At each roasting stage,
you may set the roasting temperature and the roasting time.
1) To start programming, push "Roast/Temp" and "Cool/Time"
buttons
-SET-
LCD displays "Prog":
2) Push "Roast/Temp"
" St 1" (roasting stage1):
Push
or
temperature for this stage (increments/decrements of 5°F for
American models or 2°C for European and Asian models).
3) Push "Cool/Time"
for this stage: LCD displays "St 1" (roasting stage 1):
Push
or
(increments/decrements of 1 second)
4) You can repeat steps 2 and 3 for all five stages. LCD will
display "St 2" through "St 5" respectively.
The display will show "Full" when the maximum of 15 minutes has
been used.
5) After all desired stages are set, push "Roast/Temp" and
"Cool/Time" buttons
displays "Set":
If you want to change the setting you have already input or want to
start over, you may repeat the above mentioned steps.
NOTES:
(A) Programmable temperature ranges are: 320°F - 485°F for
American models, and 160°C to 250°C for European and Asian
models.
(B) At any roasting stage, you can set the roasting time from 0 to
15 minutes, but the total of all five stages cannot exceed 15
minutes.
(C) You do not have to set all five stages. You have the option of
setting either 1,2,3,4 or 5 stages as you wish.
at the same time to start.
button again: LCD shows
to increase or decrease to your desired
button to set up roasting time
to increase or decrease the roasting time,
-SET
3
at the same time: LCD
Advertisement
