Table of Contents
Advertisement
It should be noted that the driver installation program includes an automatic firmware update, if required.
Therefore, prior to installing the application and driver, ensure that LK1 is fitted.
Extended Display Identification Data (EDID) - Disable Links
EDID is data provided by a display monitor and sent to the graphics device detailing monitors capabilities
thereby enabling a system to identify the type of monitor that is attached.
The graphics device installed on your machine will see the card as a monitor and will expect to receive the
EDID data from the card.
However, in rare circumstances it may be necessary that the XV-SD4+1/SD4+1S does not report an EDID
of any kind. In this instance EDID support can be disabled by removing links LK3.
Removing the LK3 link on the XV-SD4+1/SD4+1S card will disable the EDID function on the DVI/RGB
channel.
Software Installation
The XV- software (driver and application) is installed by inserting the CD that was shipped with your
card into your CD ROM drive. The installation process should start automatically.
Should the CD fail to autorun use Explorer to browse the CD, locate then double click on install.exe file e.g.
d:/install.exe and click on Install Software... and follow the installation wizard instructions as prompted.
Regular software updates are available from our website: www.x-viewmedia.com
Also available on the X-View CD:
•
The Release Notes - The release notes contain the latest information on the XV-SD4+1/SD4+1S
including:
Installation instructions.
Release history
Known problems
Troubleshooting
•
The application Help File - Instructions on how to use the application.
•
Test patterns to assist in setting up an analog RGB / DVI source (see help file topic How to set up an
RGB / DVI Source)
49
Advertisement
Table of Contents
