Do you have a question about the 7931 and is the answer not in the manual?
Questions and answers
Summary of Contents for Comfort 7931
Page 1
Comfort Personal Cleansing ™ Microwave Warmer Operating Instructions Model Number 7931 For use with Comfort Personal Cleansing brand bathing, ™ incontinence and haircare products only. Please read and understand these instructions completely prior to operating the Comfort Personal Cleansing ™...
IMPORTANT SAFETY INSTRUCTIONS This microwave is to be used SOLELY for Sage Comfort Personal Cleansing™ products. The microwave has been electronically programmed and safety tested to be used exclusively with Comfort Personal Cleansing products. ANY other use of the microwave by the facility, including but not limited to, use with other bathing products can result in overheating, fire or other hazardous conditions and is expressly forbidden.
• product in the microwave during warming. 19. Do not store flammable materials in the proximity of the Comfort Personal Cleansing Microwave. It could be a fire hazard. 20. Equipment not suitable for use in the presence of a flammable anesthetic mixture with air, or with oxygen or nitrous oxide.
(Figure 1). 2. The microwave must be on a SEPARATE CIRCUIT. No other appliance should share the circuit with the microwave. If it does, the branch circuit fuse may blow, or the circuit breaker may trip or Comfort Personal Cleansing products may warm slower than the times recommended.
Using a lower voltage will cause slow heating. Sage/MRA are NOT responsible for damage resulting from the use of the microwave with other than specified voltage. SAFETY PRECAUTIONS This microwave is to be used SOLELY in connection with the use of the Comfort Personal Cleansing ™ products.
OUTLINE DIAGRAM Control Panel 1. Digital Display Window (see below) 2. Memory Pad 3. STOP/RESET Pad 4. START Pad 5. Control Panel 6. Door Safety Lock System 7. Oven Window with Heat/Vapor Film (Do not remove) 8. Oven Lamp 9. Splash Guard/Light Diffuser STOP/RESET START Digital Display Window...
SECURITY BOLT INSTALLATION INSTRUCTIONS Important: Sage Products or its suppliers, Panasonic Canada Inc. and the PIC (Panasonic Industrial Company) are not responsible for any damage caused by improperly installing this microwave. Read and follow these instructions carefully. Tools and Parts The following tools and parts are needed to install the oven: One 5/16-inch bolt purchased by user (See “How to Select the Bolt Length”) •...
TECHNICAL SPECIFICATIONS Power Source 120V, 60 Hz, single phase Required Power 14.0 Amps, 1500 Watts Steady State Current † Output 1000 Watts Frequency 2,450 MHz Outer Dimensions (H x W x D) 12” x 20-1/8” x 14-1/8”; 306 mm x 510 mm x 360 mm Cavity Dimensions (H x W x D) 8-1/16”...
Need help?
Do you have a question about the 7931 and is the answer not in the manual?
Questions and answers