Zetta Z11 mini Quick Start Manual

Zetta Z11 mini DVR Quick Start Guide
Overview
Congratulations on your purchase of Zetta Z11 mini DVR!
Zetta Z11 mini DVR is a sleek and wearable mini DVR. The mini DVR comes with a built-in
rechargeable battery which can last up to 8 hours during typical use. By plugging in the 5V
DC adapter, it can achieve 24 hours circular recording for surveillance use.*
*Actual life and performance may vary depending upon usage and settings; battery not replaceable.
Features
Digital video recorder – recording of 640x480(VGA) or 320x240(QVGA) video and sound.
Confi gurable video quality – high / medium / low
Circular recording – loop back recording once memory card is full
Time stamp – put time stamp on video
Frame rate adjustment – lower the frame rate to save memory space
Auto split fi le – split fi les for every 10 / 15 / 30 minutes, easily manipulated to Facebook,
YouTube, Twitter
Selectable day/night mode – select day mode or night mode to suit your environment
Auto daylight saving time(DST) adjustment
Support max 32GB microSD(TF) card (for better performance, use card with class 4 or
above and format the card before use).

Minimum System Requirements

Windows 2000, XP, Vista, 7 (mass storage class)
Windows Media Player 9
Intel Pentium class computer
USB 2.0 port for hi-speed transfers and charging

Package Contents

Please unpack your Zetta Z11 mini DVR and check that the following were included:
Zetta Z11 mini DVR
5V DC Adapter
USB 2.0 Cable
Quick Start Guide
Zetta Z11 mini DVR at a Glance
Technical support: www.zetta.com.hk/support/z11
Charging
The Zetta Z11 mini DVR comes with an internal rechargeable battery. To use the mini DVR for
the fi rst time or not using the mini DVR for a long time, remember to fully charge the battery
and resync the time by using the confi guration tool (see section "Time synchronization and
custom settings confi guration"). You can charge your mini DVR through the USB port of your
computer or the DC adapter.
To charge the battery through USB port, connect the USB cable to the USB port of the
computer and the mini DVR. For details, please see the status below. The mini DVR will
function as a mass storage device, you will not be able to record video at this moment.
To charge the battery through DC adaptor, connect the DC adaptor to the mini DVR. For
details, please see the status below. Moreover, you will also be able to record video while
charging.
Recording
The power button is located at the right side of the mini DVR. It can turn the mini DVR on or
off.
Start Recording
Press and hold the Power button for approximately 2 seconds until the green LED is on, and
then release the button. When you see the green LED fl ashing, the mini DVR is recording.
Otherwise, please see the status below.
Stop Recording
Press and hold the Power button for approximately 2 seconds until the green LED is off.
WARNING: Turn off Z11 mini DVR before removing card!
Status
Without DC adapter
Green LED on: mini DVR is booted up
Red LED on: no card, card fail, battery low or card full (not in circular recording)
Green LED fl ashing: normal recording
Green / Red LED intermittent fl ashing: battery low and recording
DC adapter plugged in
Red LED fl ashing: charging
Red LED on: no card, card fail or card full (not in circular recording)
Orange / Green LED intermittent fl ashing: charging and recording
Green LED fl ashing: charging complete and recording
All LED off: charging complete and no recording
Connected to computer
Orange LED on: charging
Green LED on: charging complete
Knowledge base: www.zetta.com.hk/kb/z11 Forum: www.zetta.com.hk/forum/z11