Dell Dimension XPS R Series Setup Manual page 49

To install a Plug and Play device on a system running Windows 98, follow these steps:
1. Save and exit any application programs and files you have open.
2. Shut down Windows 98 as instructed in "Shutting Down Your Computer" in
Chapter 3.
3. Turn off the computer system.
4. Connect the device to the computer according to the manufacturer's instructions.
5. Turn on the computer system.
When Windows 98 starts, a New Hardware Found window appears, indicating
that the device has been detected and configured.
NOTE: To install and configure a non-Plug and Play device for use with Windows 98,
click the Start button, point to Settings, and click Control Panel. Double-click the
Add New Hardware icon, and follow the instructions displayed.
You can purchase various upgrades for your computer, including memory, hard-disk
drives, printers, and so on. Refer to "Available Upgrades" in Chapter 1 of the Refer-
ence and Troubleshooting Guide for information on upgrading your system.
Using Computer Hardware 4-11