AGP/PCI Frequency Setting [Auto]
When set to [Auto], this field allows automatic selection of AGP/PCI frequency
to enhance system performance and overclocking capability. The setting
[Manual] allows you to manually select the AGP/PCI frequency. If the system
becomes unstable, return to the default setting [Auto]. When this item is set
to [Manual], the
AGP/PCI Frequency (MHz)
[Auto] [Manual]
AGP/PCI Frequency (MHz) [66.66/33.33]
This item appears only when the
This field allows you to select a higher AGP/PCI frequency for better system
performance.
Selecting a very high AGP/PCI frequency may cause the system to be
unstable!
CPU VCore Setting [Auto]
This field determines if the CPU Vcore is automatically scaled or set manually
by the user. The default for this field is [Auto], so the CPU vcore voltage is
set for maximum performance without stressing the CPU. Configuration
options: [Manual] [Auto]
CPU VCore [1.750V] (for Willamette), [1.500V] (for Northwood)
When the CPU VCore Setting parameter above is set to [Manual], the CPU
VCore item allows you to select a specific CPU core voltage. This field is not
accessible when the CPU VCore Setting is set to [Auto]. Depending on the
OVER_VOLT jumper setting (see page for the jumper location and settings),
the CPU core voltage options vary for both Willamette and Northwood
processors. See the following table:
OVER_VOLT
Jumper
P4 Processor
Willamette
Northwood
ASUS P4T533 motherboard user guide
item appears. Configuration options:
AGP/PCI Frequency Setting
Disabled
1.750V, 1.775V, 1.800V,
1.825V, 1.850V
1.500V, 1.525V, 1.550V,
1.575V, 1.600V, 1.625V,
1.650V, 1.675V, 1.700V
is set to [Manual].
Enabled
1.750V, 1.775V, 1.800V,
1.825V, 1.850V, 1.875V,
1.900V, 1.925V, 1.950V
1.500V, 1.525V, 1.550V,
1.575V, 1.600V, 1.625V,
1,650V, 1.675V, 1.700V,
1.725V, 1.750V, 1.775V,
1.800V
67