Hotpoint DLB2880D Use And Care Manual page 11

PROBLEM
KNITS
PERMANENT PRESS
AND "NO-IRON"
ITEMS
and elongated by the manufacturer. When this occurs, garment may be pressed back into
shape after each wash ~ddry cycle.
Shrinkage ~~ byoverbwting occurs in certain hit fabrics that have been heat-
shaped. When washing, dry~ or ironing temperatures exceed the temperatures used to
shape set, shrinkage may occur. This cannot be corrected, but it can bepreventedby
them immediately.
Too many items in dryer. Dry only one washer load at a time. Do not combine loads.
with lighter Permanent Press items, such as shirts or blouses. Do not washer dry
Permanent Press with regdarlaundry.
loads should always be smdlerthan regular loads.. .no more tianmedium loads.
Use of incorrect wash and dry cycles. Use Permanent PNS Wsh Cycle which provides
a cooldown rinse to minimize wrhdding. Also, use Permanent Press ~edium)
selection.
. Incor~t~terlevel. Use Full Wa&r Fill firm~ium load; M~ium Fill for
small load.
11
.