GE GSD1200 Use And Care Manual page 12

HOW TO C~NGE COLOR PANELS
If you are redecorating, you can change
to match or blend with your new colors by flipping them over. You may
also paint a panel with a color of your own choice.
How to Change the Door Panel:
Take out trim screws on either side of the
1.
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
How to Change the Lower Panel:
Bottom Panel Attachment Screws
Adding 1/4" Wood Inserts
Color insert panels for both the door and the lower
panel can be replaced by 1/4" thick wood inserts to
your kitchen cabinets. Get them from your
match
nearest cabinet or lumber dealer.
your dishwasher's front panels
1.
2. On models without top mounting screws, remove
3. On models with top mounting screws, remove
4. Take out the top trim screws and remove the
5. Slide the color panel(s) up and out and put the
6. Replace the top trim and screws.
7. Replace the entire access assembly by reversing
Dimensions for 1/4" wood inserts:
NOTE: Do not operate dishwasher while changing
panels or when lower access panel is removed.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.
Remove the bottom panel attachment screws.
the entire access assembly by lifting it up and over
the retaining tabs.
the screws.
top trim.
color you want in front.
the steps.
Door Panel: 19X" H x
Lower Panel: 3'X[' H x 23%4' W.
W.