Advertisement
Do you have a question about the 790R and is the answer not in the manual?
How to put paper into the unisonic XL-1149
To load paper into the Unisonic XL-1149, follow these steps:1. Power Off: Make sure the calculator is turned off to avoid any damage or misfeed.2. Open Paper Compartment: Locate the paper compartment cover, usually at the back or top of the unit. Open it to access the paper feed area.3. Prepare Paper Roll: Use a standard paper roll compatible with the device. Cut the end of the paper straight to ensure smooth feeding.4. Insert Paper: Insert the straight edge of the paper roll into the paper slot. Feed it gently until it catches and appears in the print area.5. Advance Paper: Turn the paper feed knob or press the paper advance key (if available) to pull the paper further through the printer mechanism.6. Close Compartment: Once the paper is properly fed and straight, close the paper compartment cover.7. Power On and Test: Turn on the calculator and press the paper feed button again to ensure it advances correctly.Make sure the paper feeds from the bottom of the roll, not over the top.
This answer is automatically generated
Need help?
Do you have a question about the 790R and is the answer not in the manual?
Questions and answers
How to put paper into the unisonic XL-1149
To load paper into the Unisonic XL-1149, follow these steps:
1. Power Off: Make sure the calculator is turned off to avoid any damage or misfeed.
2. Open Paper Compartment: Locate the paper compartment cover, usually at the back or top of the unit. Open it to access the paper feed area.
3. Prepare Paper Roll: Use a standard paper roll compatible with the device. Cut the end of the paper straight to ensure smooth feeding.
4. Insert Paper: Insert the straight edge of the paper roll into the paper slot. Feed it gently until it catches and appears in the print area.
5. Advance Paper: Turn the paper feed knob or press the paper advance key (if available) to pull the paper further through the printer mechanism.
6. Close Compartment: Once the paper is properly fed and straight, close the paper compartment cover.
7. Power On and Test: Turn on the calculator and press the paper feed button again to ensure it advances correctly.
Make sure the paper feeds from the bottom of the roll, not over the top.
This answer is automatically generated