Advertisement
Quick Links
Advertisement
Summary of Contents for Viking VKFS 330 15R
- Page 1 Viking VKFS 330 15R Followspot __________________ User Manual...
-
Page 2: Table Of Contents
Content 1. Contents .................... 02 2. Caution ..................... 03 3. Dimensions ..................04 4. Product info ..................05 5. Parts info ................... 06 6. Lamp replacement ................07 7. Operation & Control Panel ............. 08 Inside structure ................10 9. PCB ....................10... -
Page 3: Caution
2 Caution 2.1 Before installation, please check the unit for any damage in transport, and in particular that no foreign objects have become lodged in the end of the lens tube. 2.2 The unit should be mounted on the stand supplied using the spigot (or similar) and stood on even ground. -
Page 4: Dimensions
3. Dimensions: (mm) Colour Wheel: Colour Temperature Wheel: 01—White 02—Red 01—6500K 02—5600K 03—Yellow 04—Blue 03—4300K 04—3800K 05—Green 06—Magenta 05—3200K 06—Frost... -
Page 5: Product Info
4. Product information 1. Technical Specifications Lamp : YODN 15R 330W or SIRIUS HRI330W Lamp life span：1500hours Output：33486 Lumen at 5m - see chart below Dimmer：Linear Electronic Dimmer Colour wheel: Electronically Adjustable - 5 colours plus White Iris: Electronically Adjustable from Small to Large Spot Colour temperature：Electronically Adjustable: 3200-6500K plus Frost Focus：Electronically Adjustable Zoom Lens: Electronically Adjustable: 5-10 degrees... -
Page 6: Parts Info
5. Parts information 01 —control panel 02 —handle 03 —stand handle 04 —light 05 —lens 5.1 Control panel 01 —display screen 02 —Channels rod 03 —Colours key 04 —Power switch 05 —Fuse 06 —Power input... -
Page 7: Lamp Replacement
6. Lamp replacement 1. Remove the rear handle 2. Remove the control panel box 3. Remove the lamp rear panel 4. Remove the screws for the lamp 5. Use the screwdriver to hold the metal. 6. Remove the lamp power cable 7. -
Page 8: Operation & Control Panel
Control panel Operation There is a hidden On/Off switch to prevent unauthorised use of the light. When the lamp is off, press the red key for 3 seconds, the display will show (on) and will strike. The lamp will take a few minutes to reach maximum brightness. To turn the lamp off, press the white key for 3 seconds, the display will show (OFF) and will extinguish but the cooling fan will continue working. - Page 9 2. Menu Operation - This option is for service use only. Access to the menu is by pressing both the green and pink buttons simultaneously. Blue Key: SELECT (Save the updated value and return back to the main menu) White Key: DOWN (or +),can plus continually if pressed for more than 1 second Red Key: UP (or -), can minus continually if pressed for more than 1 second...
-
Page 10: Inside Structure
Internal structure 01 —Lamp socket 02 —Fan 03 —Driving board 04 —Focus module 05 —Slide bar 06 —zoom module 07 —belt 9. PCB...