Turning Off Alarm/Snooze Operation; Using The Alarm Clock; Connect To Bluetooth Audio Device - Bauhn S1-BT User Manual

Speaker Dock with Alarm Clock Radio
Turning Off the alarm/Snooze operation
Press the SNOOZE bar to stop the alarm at any time. The alarm will be switched
off for the next nine minutes.
NOTE: You can repeat this process for six times. After that, the alarm will turn off
and will not sound again until the next set time.
To turn off the alarm completely, simply press the "Alarm 1" (
1.
"Alarm 2" (

Using the alarm clock

The radio will store the alarm time in memory when turned off.
To turn on the alarm clock again, simply press the "Alarm 1" (
1.
"Alarm 2" (
Press the alarm button one time to choose radio or press the button a second
2.
time to choose the buzzer to wake you up.
Press the "SET/MODE"(
3.
second time to confirm the pre-set minute and a third time to complete the alarm
clock setting.
Connect to a Bluetooth
Press the power "ON/OFF" (
1.
Press the "SET/MODE"(
2.
flashing on the display.
Turn on your Bluetooth
3.
for the first time.
NOTE: If your Bluetooth
If "BAUHN RDO" cannot be found in your Bluetooth
again for available Bluetooth
The radio will sound a hint tone once the pairing was successful and the
4.
®
Bluetooth icon will be shown permanently on the display.
12
serviceusa@tempo.org
) button.
2
) button. The display will begin flashing.
2
®
®
device and select "BAUHN RDO" to pair and connect
®
device prompts you for a passcode, enter "1234".
) button once to confirm the pre-set hour, a
audio device
) button on top of the unit.
) button until the the Bluetooth
®
devices.
) or
1
) or
1
®
icon will be
®
device list, scan
AFTER SALES SUPPORT
866-235-5029
USA
USA
Instructions