Panasonic DMR-EZ28 Quick Setup Manual page 2

Connecting with an HDMI (High Defi nition Multimedia Interface) Cable
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted,
enabling you to enjoy high quality digital video and audio with just one cable. When connecting to an HDMI-
compatible HDTV (High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video.
• Please use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the cover of the operating
instructions). It is recommended that you use Panasonic's HDMI cable.
RF IN
Cable from the
wall / antenna
signal
(Included)
2 1
(Included)
4
• Set "HDMI Priority" and "HDMI Audio Output" to "On" (The default setting is "On".)
( pages 54 and 55 in the operating instructions).
For details on the benefits and limitations of different types of connections, please refer to pages 8 to 11,
59 to 61 in the operating instructions.
TM
VIERA Link "HDAVI Control
What is VIERA Link "HDAVI Control"?
TM TM
VIERA Link is a new name for EZ Sync .
VIERA Link "HDAVI Control" is a convenient function that offers linked operations of this unit, and a Panasonic TV
(VIERA) or receiver under "HDAVI Control". You can use this function by connecting the equipment with the HDMI
cable.
For details on the benefits of "HDAVI Control", please refer to pages 34 and 35 in the operating instructions.
HDMI IN
3
HDMI AV OUT
This unit
TM
"
Initial Settings
Preparing the TV
1
Turn the TV on.
2
Selecting the video input on your TV.
Activate the TV's video input which was connected to this unit.
e.g. the TV/VIDEO or INPUT button
3
Turn this unit on.
TV
4
Select the language.
• If you make a mistake, press RETURN.
5
Select the type of TV you are using.
6
Set Quick Start to "On" or "Off".
7
Select whether to receive TV signal from
the unit's RF IN terminal or not.
• If you select "No", you can proceed to "Set Clock Manually"
( Step 9, lower right).
8
Select "Antenna" or "Cable".
9
Complete the settings.
• If the correct time is displayed
Set Clock Automatically
Clock Setting completed successfully.
4/4/2006 12:15 AM
DST....................
Time Zone........
OK
• Please refer to "Basic Operations" (pages 15 to 19) in the operating instructions.
Using your TV's
remote control
• When this unit is connected to a Panasonic TV
(VIERA) supporting HDAVI Control 3 and initially
set up, it automatically acquires the TV setting
information. For details, please refer to page 14 in
the operating instructions.
Select,
Select Language
Seleccione el idioma
Sélection de langue
OK
English
set
Español
Français
Press OK
Pulse OK
Appuyer sur OK
Select,
Aspect Ratio Selection
Select TV type and press OK
(Please refer to Operation Instruction
OK
for details)
set
4:3 4:3 TV
16:9 16:9 Widescreen TV
OK
Quick Start Setting
Select,
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power OK
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ? set
On
Off
OK
Select,
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit's RF IN. OK
set
Yes
No
OK
Select,
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
OK
set
Antenna
Cable
Press [OK] to start automatic clock and
OK
channel setting.
• If the clock setting screen appears
Set Clock Manually
Month Day Year
OK
1 / 1 / 2000 SAT
On
EST
OK
Video 1
DRIVE
SELECT
FAVORITE
DELETE
OK
A B
• To return to the
previous screen
Select,
Hour Minute
next,
OK
12 : 00 AM
DST Time Zone set
Off EST