Panasonic DMR-EZ17 Quick Setup Manual page 2

Connecting with Video Cassette Recorder (VCR)
Connecting to a TV
A1
and a VCR
Cable from the wall /
antenna signal
Connecting to a
B1
TV, a VCR and a
Cable Box
The front panel
IN2
of this unit
VCR
AV OUT
• When you record on a VCR, you need to connect this unit using coaxial cables. Please refer to page 42 in the operating instructions.
Connecting to a TV,
C1
a VCR and a Satellite
Receiver
Satellite
The front panel
IN2
Antenna
of this unit
VCR
AV OUT
• When you record on a VCR, you need to connect this unit using coaxial cables. Please refer to page 42 in the operating instructions.
TV
RF IN AV IN
You must make
(Included) 2
this connection.
(Included)
3
RF IN
RF OUT
(Included)
6
4 5
RF IN
AV OUT
RF OUT
TV
RF IN AV IN
Cable from the wall /
antenna signal
3
(Included)
1
RF IN
RF OUT
(Included)
(Included) 6
4 2 5
RF IN
AV OUT
RF OUT
TV
RF IN AV IN
(Included) 2 3
(Included)
(Included)
5 4
1
AV OUT
SATELLITE IN RF OUT
Initial Settings
Preparing the TV
1
Turn the TV on.
2
Selecting the video input on your TV.
Activate the TV's video input which was connected to this unit.
e.g. the TV/VIDEO or INPUT button
3
Turn this unit on.
This unit
4
Select the language.
VCR
• If you make a mistake, press RETURN.
5
Select the type of TV you are using.
You must make
this connection.
6
Set Quick Start to "On" or "Off".
This unit
7
Select whether to receive TV signal from
the unit's RF IN terminal or not.
Cable box
• If you select "No", you can proceed to "Set Clock Manually"
( Step 9, lower right)
8
Select "Antenna" or "Cable".
You must make
this connection.
This unit
9
Complete the settings.
• If the correct time is displayed
Set Clock Automatically
Clock Setting completed successfully.
Satellite
receiver
ENTER
• Please refer to "Basic Operations" (pages 6 to 9) in the operating instructions.
Using your TV's
remote control
Select Language
Seleccione el idioma
Sélection de langue
English
Español
Français
Press ENTER
Pulse ENTER
Appuyer sur ENTER
Aspect Ratio Selection
Select TV type and press ENTER.
(Please refer to Operation Instruction
for details)
4:3 4:3 TV
16:9 16:9 Widescreen TV
ENTER
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
ENTER
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit's RF IN.
Yes
No
ENTER
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Antenna
Cable
Press [ENTER] to start automatic clock and
ENTER
channel setting
• If the clock setting screen appears
4/4/2006 12:15 AM
DST.................... On
Time Zone........ EST
ENTER
Video 1
Select,
set
Select,
set
Select,
set
• To return to the
Select,
previous screen
set
Select,
set
Set Clock Manually
Select,
Month Day Year
Hour Minute
next,
1 1 2000 12 00
/ / SAT : AM
DST Time Zone set
Off EST
RQCA1594
H1206KY0